IC-Hersteller STMicroelectronics

IC-Hersteller (107)

STMicroelectronics SR5E1E770C30F01X | Demoboard STEVAL-HILE1G4K1

SR5 E1 line of Stellar electrification MCUs, 32-bit Arm Cortex-M7 automotive MCU 2x cores, 2 MB Flash, rich analog, high-resolution timer, HSM, ASIL-D

Details

TopologieSonstige Topologie
IC-Revision1.0

Beschreibung

The STEVAL-HILE1G4K1 evaluation kit includes an emulator board based on the Stellar E1 MCU and a control board featuring the STM32G474RE MCU.Designed for safe, low-voltage emulation of digital power converters, it enables verification of control algorithms by simulating a virtual power circuit where the real controller interacts under both normal and fault conditions, eliminating the risk to physical power hardware.The HIL board emulates the complete power conversion system, including AC and DC sources, converter power stages, and loads.It supports multiple converter types such as three-phase PFC and isolated DC-DC converters, covering topologies like the Vienna rectifier, 3-Level T-type, 3-Phase 2-Level (B6), and dual active bridge (DAB) converters.A dedicated software GUI offers intuitive real-time visualization and analysis of critical parameters and signals, enabling users to monitor system performance, detect anomalies, and fine-tune control algorithms efficiently. The interface supports customizable dashboards, signal logging, and interactive controls to facilitate comprehensive debugging and validation throughout the development process.This kit significantly reduces development time and costs by enabling early-stage testing and debugging of power converter control strategies in a risk-free environment.

Eigenschaften

  • Model-based power plant emulation
  • High simulation accuracy for AFE and VSI (maximum simulation frequency: 100 kHz)
  • Extensive onboard I/Os: 12x PWM inputs, 20x DAC outputs
  • Fault injection support
  • AC and DC overvoltage
  • AC and DC overcurrent
  • User interface: pushbuttons, LEDs, potentiometers
  • Grid and relay status monitoring
  • Grid and load activation and setting
  • GUI for real time monitoring and efficient debugging

Typische Anwendungen

  • Power supplies and converters

Weiterführende Informationen

Artikeldaten

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
Anwendung
PCB/Kabel/Panel
Modularity
Wire Section
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
Q
DF(%)
RISO
Keramiktyp
B(mm)
H(mm)
Fl(mm)
Verpackung
R
Tol. R
PRated(W)
TCR(ppm/ °C)
TCR(ppm/ °C)
VE(V)
Version
Montageart
IR(A)
Stranded Wire Section (AWG)
Arbeitsspannung(V (AC))
Farbe
Gender
Poles
L(mm)
Dampfphasenprozess
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(Ω)
Typ
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWR-PHD Kurzschlussbrücken, 1, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +125 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
Nennstrom3 A
Arbeitsspannung250 V (AC)
FarbeSchwarz 
GenderJumper 
Länge2.44 mm
Verfügbarkeit prüfen
SPECWR-TBL Serie 2135 - 5.08 mm Horizontal Entry Modular w. Rising Cage Clamp, 2, Käfigzugklemme
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
AnwendungKäfigzugklemme 
PCB/Kabel/PanelPCB 
ModularityJa 
Wire Section 14 to 30 (AWG) 2.08 to 0.0509 (mm²)
Betriebstemperatur -30 °C up to +120 °C
VerpackungKarton 
MontageartTHT 
Nennstrom14 A
Stranded Wire Section (AWG)14 to 30 (AWG) 
Arbeitsspannung250 V (AC)
FarbeGrün 
Länge10.16 mm
TypHorizontal 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 2, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge5.08 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 3, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge7.62 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 4, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge10.16 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Zweireihig, 4, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge5.08 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Zweireihig, 6, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge7.62 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-BHD 2.54 mm Wannenstiftleiste, 8, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird sich in Kürze das Datenblatt des ausgewählten Produktes ändern. Anbei finden Sie das neue Datenblatt, sowie das noch gültige Datenblatt. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungTray 
VersionLow Profile 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderMännlich 
Länge17.82 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Zweireihig, 14, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird in Kürze eine Änderung am Bauteil durchgeführt. Anbei finden Sie die entsprechende PCN. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins14 
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge17.78 mm
TypGerade 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Zweireihig, 16, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins16 
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
Länge20.32 mm
TypGerade 
Verfügbarkeit prüfen
SPECWE-CBF SMT-Ferrit, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.3 mm
VersionSMT 
MontageartSMT 
Nennstrom0.5 A
Länge1.6 mm
Impedanz @ 100 MHz120 Ω
Maximale Impedanz200 Ω
Maximale Impedanz510 MHz 
Nennstrom 21350 mA
Gleichstromwiderstand0.3 Ω
TypBreitband 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität2.2 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Kapazität±20% 
Nennspannung16 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +85 °C
Verlustfaktor10 %
Isolationswiderstand0.01 GΩ
KeramiktypX5R Klasse II 
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Länge2 mm
Verfügbarkeit prüfen
SPECWS-DISV Small Compact SMT with Raised Actuator 2.54 mm, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennspannung24 V (DC)
Betriebstemperatur -40 °C up to +85 °C
Isolationswiderstand100 MΩ
VerpackungTape and Reel 
Nennstrom0.025 A
Poles
Länge21.26 mm
Dampfphasenprozessnicht spezifiziert 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 100 V(DC), –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 nF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand2.1 GΩ
KeramiktypX7R Klasse II 
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand0 Ω
Widerstand+0.05Ω/-0Ω 
Nennleistung0.1 W
MontageartSMT 
Nennstrom1 A
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand10 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand1 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand22 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand12 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand2 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand8.2 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand100 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand4.7 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand2.7 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand10 Ω
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-200 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)400 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen
SPECWRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Breite0.8 mm
Höhe0.45 mm
Widerstand2.2 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V
MontageartSMT 
Länge1.6 mm
Verfügbarkeit prüfen