IC-Hersteller STMicroelectronics

IC-Hersteller (108)

STMicroelectronics L99BM114 | Demoboard STEVAL-BMS114TX

Details

TopologieBattery Management System
IC-Revision1.0

Beschreibung

The STEVAL-BMS114TX is a battery management system (BMS) evaluation board that manages from 4 to 14 battery cells.The main advantage of this evaluation board is ensuring isolated connection to an external MCU, thanks to the embedded transceiver.The board is based on the L99BM114 Li-ion battery monitoring and protection chip for high-reliability applications and the L99BM1T general-purpose SPI to isolated SPI bidirectional transceiver.The main activity of the L99BM114 is monitoring the cells and battery node status through stack voltage measurement, cell voltage measurement, temperature measurement, and coulomb counting.Measurement and diagnostic tasks can be executed either on demand or periodically, with a programmable cycle interval.Measurement data are available for an external microcontroller to perform charge balancing and to compute the state of charge (SOC) and the state of health (SOH).The L99BM1T general-purpose SPI to isolated SPI bidirectional transceiver can transfer communication data incoming from a classical 4-wire based SPI interface to a 2-wire isolated interface (and vice versa). In our board, the transceiver is configured as a slave.The STEVAL-BMS114TX provides an elaborate monitoring network to sense the voltage of each cell. It is possible to sense the current of the entire battery pack.Passive cell balancing can be performed either via the L99BM114 internal MOSFETs or via external MOSFETs. The controller can either manually control the balancing drivers or start a balancing task with a fixed duration. In the second case, the balancing may be programmed to continue even when the IC enters a low-power mode called silent balancing, to avoid unnecessary current absorption from the battery pack. The balancing function is necessary to lengthen the battery capacity and its duration.

Eigenschaften

Hosts the L99BM114 multicell battery monitoring and balancing ICHosts the L99BM1T general purpose SPI to isolated SPI bidirectional transceiverVoltage monitoring of every single cell and of the entire battery nodeCurrent sensing of the entire battery node5 GPIOs to connect temperature sensors as NTCsCN1 connector that allows establishing communication with an MCU board via SPICN2 connector that interfaces directly to an MCU board for control and diagnostic functionsPassive balancingCompact size: 100 mm x 76 mm

Typische Anwendungen

  • Energy generation and distribution

Weiterführende Informationen

Von STMicroelectronics freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
2θ50% typ.(°)
Gender
Pins
Typ
Wire Section
Kontaktbeschichtung
IR(A)
Arbeitsspannung(V (AC))
Kontaktwiderstand(mΩ)
Verpackung
VPE(pcs)
Stranded Wire Section (AWG)
Stranded Wire Section (Metric)
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
Q
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Package
Input
VCE max.(V)
IF max.(mA)
Testbedingung CTR
CTR min.(%)
CTR max.(%)
VISO(V (RMS))
Schlüsselweite(mm)
Ti
Brennbarkeitsklasse
Anwendung
Interface typ
Montageart
Leiterplattendicke(mm)
Farbe
Polarität
IR 1(A)
PCB/Kabel/Panel
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 470 nm, Blau
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]470 nm
Emittierte FarbeBlau 
Spitzen-Wellenlänge [typ.]465 nm
Lichtstärke [typ.]145 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
–
–
–
–
–
–
–
–
VerpackungTape and Reel 
Verpackungseinheit4000 pcs
–
–
–
–
–
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
Länge2 mm
Breite1.25 mm
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartSMT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 525 nm, Grün
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]525 nm
Emittierte FarbeGrün 
Spitzen-Wellenlänge [typ.]515 nm
Lichtstärke [typ.]450 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
–
–
–
–
–
–
–
–
VerpackungTape and Reel 
Verpackungseinheit4000 pcs
–
–
–
–
–
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
Länge2 mm
Breite1.25 mm
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartSMT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 590 nm, Gelb
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]590 nm
Emittierte FarbeGelb 
Spitzen-Wellenlänge [typ.]595 nm
Lichtstärke [typ.]120 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
–
–
–
–
–
–
–
–
VerpackungTape and Reel 
Verpackungseinheit4000 pcs
–
–
–
–
–
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
Länge2 mm
Breite1.25 mm
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartSMT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 605 nm, Bernstein
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]605 nm
Emittierte FarbeBernstein 
Spitzen-Wellenlänge [typ.]610 nm
Lichtstärke [typ.]130 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
–
–
–
–
–
–
–
–
VerpackungTape and Reel 
Verpackungseinheit4000 pcs
–
–
–
–
–
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartSMT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Rot
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]625 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]150 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
–
–
–
–
–
–
–
–
VerpackungTape and Reel 
Verpackungseinheit4000 pcs
–
–
–
–
–
Bauform0805 
Betriebstemperatur -40 °C up to +85 °C
–
–
–
–
Länge2 mm
Breite1.25 mm
Höhe0.7 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartSMT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität22 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte840 
–
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität33 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 
–
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität2.2 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität4.7 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität6.8 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität10 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität47 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor3 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität68 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor3 %
Isolationswiderstand7.4 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit3000 pcs
–
–
Kapazität2.2 µF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor10 %
Isolationswiderstand0.05 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit3000 pcs
–
–
Kapazität1 µF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor10 %
Isolationswiderstand0.1 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit2000 pcs
–
–
Kapazität4.7 µF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform1206 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor10 %
Isolationswiderstand0.02 GΩ
KeramiktypX7R Klasse II 
Länge3.2 mm
Breite1.6 mm
Höhe1.6 mm
Pad Dimension0.5 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWR-WTB 2.54 mm Stiftleisten, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderMännlich 
Pins4 
TypVertikal 
–
KontaktbeschichtungZinn 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge10.16 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartTHT 
–
–
–
–
PCB/Kabel/PanelPCB 
–Verfügbarkeit prüfen
SPECWR-WTB 2.54 mm Stiftleisten, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderMännlich 
Pins6 
TypVertikal 
–
KontaktbeschichtungZinn 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge15.24 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartTHT 
–
–
–
–
PCB/Kabel/PanelPCB 
–Verfügbarkeit prüfen
SPECWR-WTB 2.54 mm Crimp-Buchsengehäuse, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderWeiblich 
Pins4 
TypKlemmengehäuse 
–
–
–
–
–
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge10.8 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
FarbeBeige 
–
–
PCB/Kabel/PanelKabel 
–Verfügbarkeit prüfen
SPECWR-WTB 2.54 mm Crimp-Buchsengehäuse, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderWeiblich 
Pins6 
TypKlemmengehäuse 
–
–
–
–
–
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge15.7 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
FarbeBeige 
–
–
PCB/Kabel/PanelKabel 
–Verfügbarkeit prüfen
SPECWR-WTB 2.00 mm Zweireihige Crimp-Buchsengehäuse mit aktiver Verriegelung, –, –
Simu­lation–
Verfügbarkeit
–
Status
NeuProdukt ist neu im Portfolio und Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProdukt ist neu im Portfolio und Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderWeiblich 
Pins30 
TypKlemmengehäuse 
–
–
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -25 °C up to +85 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge33.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Polarität30 
–
PCB/Kabel/PanelKabel 
–Verfügbarkeit prüfen
SPECWR-WTB 2.00 mm Zweireihige Stiftleisten, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderMännlich 
Pins30 
TypHorizontal 
–
KontaktbeschichtungZinn 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungTube 
–
–
–
–
–
–
–
Betriebstemperatur -25 °C up to +85 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge33.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartTHT 
Leiterplattendicke1.6 mm
FarbeWeiß 
Polarität30 
Nennstrom [1]3 A
PCB/Kabel/PanelPCB 
–Verfügbarkeit prüfen
SPECWA-SPAII Plastic Spacer Stud, metric, internal/ internal, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -30 °C up to +110 °C
–
–
–
–
Länge8 mm
–
–
–
–
–
–
–
–
–
–
–
Schlüsselweite6 mm
InnengewindeM3 
BrennbarkeitsklasseUL94 HB 
–
–
–
–
FarbeSchwarz 
–
–
–
–Verfügbarkeit prüfen
SPECWR-WTB 2.00 mm Zweireihig - Buchsen-Crimpkontakt, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderWeiblich 
–
TypCrimpkontakt 
Wire Section 28 to 22 (AWG) 0.081 to 0.326 (mm²)
KontaktbeschichtungZinn 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
Verpackunggroße Rolle 
Verpackungseinheit10000 pcs
Stranded Wire Section (AWG)28 to 22 (AWG) 
Stranded Wire Section (Metric)0.081 to 0.326 (mm²) 
–
–
–
–
Betriebstemperatur -25 °C up to +85 °C
–
–
Isolationswiderstand1000 MΩ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennstrom [1]3 A
PCB/Kabel/PanelKabel 
–Verfügbarkeit prüfen
SPECWR-WTB 2.54 mm Buchsen-Crimpkontakt, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderWeiblich 
–
TypCrimpkontakt 
Wire Section 28 to 22 (AWG) 0.081 to 0.326 (mm²)
KontaktbeschichtungZinn 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
Verpackungkleine Rolle 
Verpackungseinheit1000 pcs
Stranded Wire Section (AWG)28 to 22 (AWG) 
Stranded Wire Section (Metric)0.081 to 0.326 (mm²) 
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Nennstrom [1]3 A
PCB/Kabel/PanelKabel 
–Verfügbarkeit prüfen
SPECWR-PHD Kurzschlussbrücken, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderJumper 
Pins1 
–
–
KontaktbeschichtungGold 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +125 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge2.44 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
FarbeSchwarz 
–
–
–
–Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderStiftleiste 
Pins2 
TypGerade 
–
KontaktbeschichtungGold 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge5.08 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartTHT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderStiftleiste 
Pins3 
TypGerade 
–
KontaktbeschichtungGold 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Kontaktwiderstand20 mΩ
VerpackungBeutel 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
Länge7.62 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
MontageartTHT 
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWR-USB Standard Steckverbinder, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
GenderBuchse 
Pins4 
TypHorizontal 
–
Kontaktbeschichtungselektiv vergoldet 
Nennstrom1.5 A
Arbeitsspannung30 V (AC)
Kontaktwiderstand20 mΩ
VerpackungTray 
–
–
–
–
–
–
–
Betriebstemperatur -40 °C up to +105 °C
–
–
Isolationswiderstand1000 MΩ
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
AnwendungUSB 2.0 
Interface typType A 
MontageartTHT 
–
FarbeWeiß 
–
Nennstrom [1]1.5 A
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 100 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
Verpackungseinheit4000 pcs
–
–
Kapazität100 pF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 100 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
–
–
–
Kapazität100 nF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor5 %
Isolationswiderstand1 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
–
–
–
Kapazität10 µF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform1210 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor10 %
Isolationswiderstand0.01 GΩ
KeramiktypX7R Klasse II 
Länge3.2 mm
Breite2.5 mm
Höhe2.5 mm
Pad Dimension0.6 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 100 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
–
–
–
Kapazität2.2 µF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform1210 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor5 %
Isolationswiderstand0.05 GΩ
KeramiktypX7R Klasse II 
Länge3.2 mm
Breite2.5 mm
Höhe2.5 mm
Pad Dimension0.75 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWA-SCRW Linsenkopfschraube M3 mit Kreuzschlitz, –, –
Simu­lation–
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
VerpackungLose 
Verpackungseinheit2000 pcs
–
–
–
–
–
–
Betriebstemperatur -30 °C up to +85 °C
–
–
–
–
Länge6 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
BrennbarkeitsklasseUL94 V-0 
–
–
–
–
FarbeNatur 
–
–
–
–Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Verpackung7" Tape & Reel 
–
–
–
Kapazität220 nF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
–
Verlustfaktor10 %
Isolationswiderstand2.3 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–Verfügbarkeit prüfen
SPECWL-OCPT SOP-4, –, –
Simu­lation
Verfügbarkeit
–
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWL-OCPT SOP-4
–
–
–
–
Durchlassspannung [typ.]1.24 V
–
–
–
–
TypOptocoupler Phototransistor 
–
–
–
–
–
–
–
–
–
–
–
–
BauformSOP4 
Betriebstemperatur -55 °C up to +110 °C
–
–
–
–
Länge4.4 mm
Breite3.6 mm
Höhe2 mm
–
PackageSOP 4 
InputDC 
Kollektor Emitter Spannung35 V
Durchlassstrom60 mA
IF = 5 mA
VCE = 5 V
Current Transfer Ratio [min.]200 %
Current Transfer Ratio [max.]400 %
Isolationsspannung3750 V (RMS)
–
–
–
–
–
MontageartSMT 
–
–
–
–
–
–Verfügbarkeit prüfen