IC-Hersteller ROHM

IC-Hersteller (104)

ROHM BD7692FJ

Boundary Conduction Mode Power Factor Correction Controller IC

Details

TopologieLeistungsfaktor-Korrektur
Eingangsspannung10-26 V
Schaltfrequenz348-667 kHz
Ausgang 113.2 V / -0.02 A
IC-Revision0509

Beschreibung

BD7692FJ is Power Factor Correction for AC/DC supplies the system which is suitable for all the products needing power factor improvement. The PFC adopts boundary conduction mode (BCM), and switching loss reduction and noise reduction are possible by Zero Current Detection (ZCD). ZCD detects by resistance, the auxiliary winding is unnecessary.

Eigenschaften

  • Boundary Conduction Mode
  • Low Power Consumption
  • VCCUVLO
  • Resister Detection for ZCD
  • Switching Loss Reduction, Noise Reduction by ZCD
  • Dynamic and Static OVP by the VS Pin
  • High Accuracy Over Current Detection (±4 %)
  • Error Amplifier Input Short Protection
  • Stable MOSFET Gate Drive by the Clamper
  • Protection Function by the OVP Pin
  • Over Voltage Reduce by Soft Start
  • Safe Design by the IS-GND Short Timer Operation

Typische Anwendungen

  • AC Adopter
  • Lighting Equipment
  • TV / Refrigerator

Weiterführende Informationen

Artikeldaten

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
C
VR(V (AC))
VR 2(V (DC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
L(mm)
B(mm)
H(mm)
Verpackung
Tol. C
Bauform
DF(%)
Keramiktyp
Fl(mm)
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
L(µH)
IR(A)
RDC max.(Ω)
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWR-TBL Serie 1379 - 7.50 mm horizontaler Kabeleingang THT Pressure Clamp WR-TBL, 3, Pressure Clamp
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityNein 
TypHorizontal 
Wire Section 30 to 12 (AWG) 0.05 to 3.31 (mm²)
Raster7.5 mm
Länge22.5 mm
VerpackungKarton 
Nennstrom24 A
Verfügbarkeit prüfen
SPECWCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 nF
Nennspannung310 V (AC)
Nennspannung 2630 V (DC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit220 V/µs
Verlustfaktor0.1 %
Isolationswiderstand21.28 GΩ
Raster15 mm
Länge18 mm
Breite8 mm
Höhe14 mm
VerpackungKarton 
Kapazität±10% 
BauformRaster: 15 mm 
Verfügbarkeit prüfen
SPECWE-FI Funkentstördrossel, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge18.5 mm
Breite10.5 mm
Induktivität90 µH
Nennstrom4.6 A
Gleichstromwiderstand0.04 Ω
Verfügbarkeit prüfen
SPECWCAP-ATLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Nennspannung50 V (AC)
Raster3.5 mm
Länge11.5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor8 %
Endurance 3000
Rippelstrom730 mA
Leckstrom50 µA
Durchmesser8 mm
Verfügbarkeit prüfen
SPECWCAP-AIG5 Aluminium-Elektrolytkondensatoren, –, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird in Kürze eine Änderung am Bauteil durchgeführt. Anbei finden Sie die entsprechende PCN. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität150 µF
Nennspannung450 V (AC)
Raster10 mm
Länge27 mm
VerpackungTray 
Kapazität±20% 
Bauform35.0 x 27.0 
Verlustfaktor20 %
Endurance 2000
Rippelstrom960 mA
Leckstrom1350 µA
Durchmesser35 mm
Verfügbarkeit prüfen
SPECWCAP-CSMH Mid and High Voltage, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 pF
Nennspannung2000 V (AC)
Isolationswiderstand10 GΩ
Länge3.2 mm
Breite2.5 mm
Höhe1.25 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1210 
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.75 mm
Verfügbarkeit prüfen
SPECWCAP-FTBP Folienkondensatoren, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Nennspannung400 V (AC)
Spannungsanstiegsgeschwindigkeit95 V/µs
Verlustfaktor0.1 %
Isolationswiderstand10 GΩ
Raster22.5 mm
Länge26 mm
Breite8.5 mm
Höhe17 mm
VerpackungKarton 
Kapazität±5% 
BauformRaster 22.5 mm 
Verfügbarkeit prüfen