IC-Hersteller ROHM

IC-Hersteller (103)

ROHM BD7692FJ | Demoboard BD7692FJ-EVK-001

Power Factor Correction Controller

Details

TopologieLeistungsfaktor-Korrektur
Eingangsspannung90-264 V
Schaltfrequenz450 kHz
Ausgang 1416 V / 0.5 A
IC-Revision001

Beschreibung

The BD7692FJ-EVK-001 reference board outputs 400 V voltage from the input of 90 Vac to 264 Vac. The output current supplies up to 0.5 A. The BD7692FJ which is BCM method PFC controller IC is used.The BD7692FJ supplies the system which is suitable for all of products that requires PFC. BCM is used for PFC part, and Zero Current Detection reduces both switching loss and noise. An auxiliary winding wire is not required because of ZCD by a resistor.

Eigenschaften

  • Boundary Current Mode
  • Low Power Consumption
  • Under Voltage Lock Out at VCC
  • Zero Current Detection by a resistor
  • Reduction of both Switching Loss and Noise by ZCD
  • Dynamic & Static Over Voltage Protection at VS
  • High Precision Over-current Detection (±4%)
  • Error Amplifier Input Short Protection
  • Stable MOSFET Gate Driving by Built-in Clamper
  • Over Voltage Protection
  • Soft Start Function
  • IS-GND Short Timer Operation

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
C
VR 2(V (DC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
Verpackung
Tol. C
Bauform
DF(%)
Keramiktyp
Fl(mm)
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
IR(A)
L(mH)
RDC max.(mΩ)
VR(V (AC))
VT(V (AC))
Material
L(mm)
B(mm)
H(mm)
Montageart
Muster
WR-TBL Serie 1379 - 7.50 mm horizontaler Kabeleingang THT Pressure Clamp WR-TBL, 3, Pressure Clamp
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityNein 
TypHorizontal 
Wire Section 30 to 12 (AWG) 0.05 to 3.31 (mm²)
Raster7.5 mm
VerpackungKarton 
Nennstrom24 A
Länge22.5 mm
MontageartTHT 
WE-CMBNC Stromkompensierte Netzdrossel Nanokristallin, 4, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Bauform
Nennstrom3.5 A
Induktivität35 mH
Gleichstromwiderstand80 mΩ
Nennspannung300 V (AC)
Prüfspannung2100 V (AC)
MaterialNanokristallin 
Länge27.5 mm
Breite18 mm
Höhe32 mm
MontageartTHT 
WCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 nF
Nennspannung 2630 V (DC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit220 V/µs
Verlustfaktor0.1 %
Isolationswiderstand21.28 GΩ
Raster15 mm
VerpackungKarton 
Kapazität±10% 
BauformRaster 15 mm 
Nennspannung310 V (AC)
Länge18 mm
Breite8 mm
Höhe14 mm
MontageartBoxed THT 
WE-FI Funkentstördrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom4.6 A
Induktivität0.09 mH
Gleichstromwiderstand40 mΩ
Länge18.5 mm
Breite10.5 mm
MontageartTHT 
WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Raster3.5 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor8 %
Endurance 3000
Rippelstrom730 mA
Leckstrom50 µA
Durchmesser8 mm
Nennspannung50 V (AC)
Länge11.5 mm
WCAP-AIG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität150 µF
Raster10 mm
VerpackungTray 
Kapazität±20% 
Bauform35.0 x 27.0 
Verlustfaktor20 %
Endurance 2000
Rippelstrom960 mA
Leckstrom1350 µA
Durchmesser35 mm
Nennspannung450 V (AC)
Länge27 mm
WCAP-CSMH Mid and High Voltage, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 pF
Isolationswiderstand10 GΩ
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1210 
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.75 mm
Nennspannung2000 V (AC)
Länge3.2 mm
Breite2.5 mm
Höhe1.25 mm
WCAP-FTBP Folienkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Spannungsanstiegsgeschwindigkeit95 V/µs
Verlustfaktor0.1 %
Isolationswiderstand10 GΩ
Raster22.5 mm
VerpackungKarton 
Kapazität±5% 
BauformRaster 22.5 mm 
Nennspannung400 V (AC)
Länge26 mm
Breite8.5 mm
Höhe17 mm