IC-Hersteller Onsemi

IC-Hersteller (104)

Onsemi NCP1034 | Demoboard STR-60-100V-BLDC-MDK-GEVB:

1kW, 60-100V Motor Development Board

Details

TopologieMotor Drive
Eingangsspannung60-100 V

Beschreibung

The STR-60-100V-BLDC-MDK-GEVB is a comprehensive motor development board and a reference design for drive low voltage 3-phase BLDC motors. The power board consists of 6 NTMFS7D5N15MC MOSFETs for the inverter stage and NCP1034 PWM synchronous buck controller for power conversion. The 3-phase power board is rated for a maximum of 100V DC and consists of all necessary system blocks for a BLDC motor driver. As part of the motor development kit, the power board is compatible with the power Universal controller board enabling high-end control strategies and AI capabilities for industrial motor control. The complete kit is Strata enabled and the graphical user interface can be used to set control parameters for the motor drive.The STR-60-100V-BLDC-MDK-GEVB comprises of the 1kW, 100V power board and hardware adapter for the UCB (Universal Controller Board)

Eigenschaften

  • Power board for Motor Development Kit (MDK)
  • Compatible with the Universal Controller Board (UCB) FPGA/ARM
  • Fully compatible with Xilinx® development tools for Zynq®-7000
  • Strata Enabled
  • Downloadable Trapezoidal control use cases for the UCB
  • VIN: 60V - 100V DC
  • Compatible with three-phase BLDC motors
  • Over current protection (OCP), Over voltage protection (OVP)
  • Plug-in connector interface for MCU cards (Arduino DUE footprint)
  • Sensored Trapezoidal control strategy implemented
  • Strata enabled and available for a quick-start evaluation
  • Xilinx® development tools and environments are available for the MDK, such as Vitis and Vivado to program the FPGA

Typische Anwendungen

  • Autonomous Mobile Robots / Automated Guided, Vehicles, Industrial drives and Robots, Fans, Pumps, and Compressors

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(mm)
To
Ti
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
B(mm)
H(mm)
Tl(mm)
Pins
Schlüsselweite(mm)
Brennbarkeitsklasse
Typ
Montageart
IR(A)
Arbeitsspannung(V (AC))
Betriebstemperatur
Betätigungskraft(g)
Schaltbild
Verpackung
MusterVerfügbarkeit & Muster
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 1.6 mm, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge1.6 mm
dominante Wellenlänge [typ.]625 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]250 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
Breite0.8 mm
Höhe0.7 mm
MontageartSMT 
Betriebstemperatur -40 °C up to +85 °C
VerpackungTape and Reel 
Verfügbarkeit prüfen
SPECWL-SMCW SMT Mono-color Chip LED Waterclear, 1.6 mm, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge1.6 mm
dominante Wellenlänge [typ.]525 nm
Emittierte FarbeGrün 
Spitzen-Wellenlänge [typ.]515 nm
Lichtstärke [typ.]430 mcd
Durchlassspannung [typ.]3.2 V
ChiptechnologieInGaN 
Abstrahlwinkel Phi 0° [typ.]140 °
Breite0.8 mm
Höhe0.7 mm
MontageartSMT 
Betriebstemperatur -40 °C up to +85 °C
VerpackungTape and Reel 
Verfügbarkeit prüfen
SPECWA-SCRW Linsenkopfschraube M3 mit Kreuzschlitz, 5 mm, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge5 mm
BrennbarkeitsklasseUL94 V-0 
Betriebstemperatur -30 °C up to +85 °C
VerpackungLose 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 5.08 mm, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge5.08 mm
Pins
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
VerpackungBeutel 
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, 7.62 mm, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge7.62 mm
Pins
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
VerpackungBeutel 
Verfügbarkeit prüfen
SPECWA-SPAII Plastic Spacer Stud, metric, internal/ internal, 13 mm, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge13 mm
InnengewindeM3 
Schlüsselweite6 mm
BrennbarkeitsklasseUL94 HB 
Betriebstemperatur -30 °C up to +110 °C
VerpackungBeutel 
Verfügbarkeit prüfen
SPECWA-SPAIE Plastic Spacer Stud, metric, internal/ external, 15 mm, M3
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge15 mm
AußengewindeM3 
InnengewindeM3 
Schlüsselweite6 mm
BrennbarkeitsklasseUL94 HB 
Betriebstemperatur -30 °C up to +110 °C
VerpackungBeutel 
Verfügbarkeit prüfen
SPECWS-SLTV THT Mini Slide Switch, Opposite Side Connection 10x2.5 mm, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom0.5 A
Betriebstemperatur -40 °C up to +85 °C
Betätigungskraft800 g
SchaltbildSPDT 
VerpackungLose 
Verfügbarkeit prüfen
SPECWP-THRSH REDCUBE THR with external thread, –, M4
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
AußengewindeM4 
Breite10 mm
Höhe8.5 mm
Gewindelänge5 mm
Pins
MontageartTHR 
Nennstrom85 A
Betriebstemperatur -55 °C up to +150 °C
VerpackungLose 
Verfügbarkeit prüfen
SPECWA-SNTE Snap-In Stop Spacer for Printed Circuit Boards, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
InnengewindeM3 
Höhe2.4 mm
Schlüsselweite5.5 mm
BrennbarkeitsklasseUL94 V-2 
Betriebstemperatur -30 °C up to +85 °C
VerpackungBeutel 
Verfügbarkeit prüfen