IC-Hersteller Analog Devices

IC-Hersteller (103)

Analog Devices LT8364 | Demoboard LT Journal April 2018

Low IQ Boost/SEPIC/Inverting Converter with 4A, 60V Switch

Details

TopologieAufwärtswandler
Eingangsspannung5-20 V
Schaltfrequenz300-2000 kHz
Ausgang 124 V / 1.4 A
IC-Revision1

Beschreibung

The LT8364 is a current mode DC/DC converter with a 60V, 4A switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture it is capable of boost, SEPIC or inverting configurations. Burst Mode operation consumes as low as 9μA quiescent current tomaintain high efficiency at very low output currents, while keeping typical output ripple below 15mV. An external compensation pin allows optimization of loop bandwidth over a wide range of input and output voltages and programmable switching frequencies between 300kHz and 2MHz. A SYNC/MODE pin allows synchronization to an external clock. It can also be used to select between burst or pulse-skip modes of operation with or without Spread Spectrum Frequency Modulation for low EMI. For increased efficiency, a BIAS pin can accept a second input to supply the INTVCC regulator. Additional features include frequency foldback and programmable soft-start to control inductor current during startup.The LT8364 is available in a thermally enhanced 12-lead 4mm × 3mm DFN package or a thermally enhanced 16-lead MSOP package with four pins removed.

Eigenschaften

  • Wide Input Voltage Range: 2.8V to 60V
  • Ultralow Quiescent Current and Low RippleBurst Mode® Operation: IQ = 9μA
  • 4A, 60V Power Switch
  • Positive or Negative Output Voltage Programming with a Single Feedback Pin
  • Programmable Frequency (300kHz to 2MHz)
  • Synchronizable to an External Clock
  • Spread Spectrum Frequency Modulation for Low EMI
  • BIAS Pin for Higher Efficiency
  • Programmable Undervoltage Lockout (UVLO)
  • Thermally Enhanced 12-lead 4mm × 3mm DFN and 16-lead MSOP packages

Typische Anwendungen

  • Medical Diagnostic Equipment
  • Industrial and Automotive
  • Telecom
  • Portable Electronics

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IR(A)
ISAT1(A)
ISAT2(A)
fres(MHz)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
Montageart
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(mΩ)
Typ
Muster
WE-PMCI Power Molded Chip Induktivität, 0.47 µH, 7.1 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität0.47 µH
Nennstrom7.1 A
Sättigungsstrom 15.15 A
Sättigungsstrom 29.95 A
Eigenresonanzfrequenz90 MHz
Performance Nennstrom7.1 A
Sättigungsstrom 15.15 A
Sättigungsstrom @ 30%9.95 A
MontageartSMT 
Nennstrom 23600 mA
Gleichstromwiderstand22 mΩ
WE-LHMI SMT Speicherdrossel, 2.2 µH, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität2.2 µH
Eigenresonanzfrequenz49 MHz
Performance Nennstrom4.05 A
Sättigungsstrom 14.45 A
Sättigungsstrom @ 30%8.4 A
MontageartSMT 
Gleichstromwiderstand61 mΩ
WE-CBF SMT-Ferrit, –, 1.5 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
Nennstrom1.5 A
MontageartSMT 
Impedanz @ 100 MHz600 Ω
Maximale Impedanz700 Ω
Maximale Impedanz150 MHz 
Nennstrom 22000 mA
Gleichstromwiderstand150 mΩ
TypHochstrom