Infineon Technologies ILD8150 | Demoboard EVAL_TOLL_72VDC_2KW

Beschreibung

The EVAL_TOLL_72VDC_2kW evaluation power board uses new OptiMOS™ 6 120 V power MOSFET technology devices for battery-powered 60 V - 84 V BLDC motor drives application suitable for high-power power tools. This evaluation board is designed to be driven by the Infineon XMC1300 drive card KIT_XMC1300_DC_V1 (or higher) loaded with the correct firmware. Both, power board and drive card, are needed for this application. A 32-pin male–female connector (MAB32B2-FAB32Q2) is needed to connect the power board and drive card.

Eigenschaften

• Single MOSFET at each leg of the inverter
• Standard 32-pin male–female connector to interface power board and XMC1300 drive card
• 72 V nominal input voltage
• Capable of both block commutation control and FOC control12.0 V and 5.0 V on-board power supplies for gate driver ICs and microcontroller, respectively

Typische Anwendungen

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers