| Topologie | Sperrwandler |
| Eingangsspannung | 1000 V |
| Schaltfrequenz | 2-16 kHz |
| Ausgang 1 | 24 V |
| IC-Revision | 1.1 |
This user guide provides information about Infineon’s EVAL-FP50R12W2T7M5 for EasyPIM™ 2B modules for three-phase input converters with TRENCHSTOP™ IGBT7 and emitter controlled 7 (EC 7) diodes (see Figure 1). This evaluation board is equipped with 1ED3321MC12N – the latest driver from the EiceDRIVER™ family that provides proper switching behavior and offers additional features such as short-circuit protection (DESAT). The isolated internal power supply for the gate driver is implemented with the flyback topology. The flyback topology is realized with the ICE5QSBG flyback controller, the 2EP130R transformer driver, and a transformer from Würth. Advantageously, the evaluation board is then independently supplied without any additional external power supply and can be operated autonomously from the HV grid. The evaluation board provides itself with the utilized 5 V generation through the TLF50211EL IC and is able to proceed with adjustable gate driver voltages (15.3 V/-10.5 V, +15.7 V/-9.1 V, 12.3 V/-6 V. 13.7 V/-6.6 V). Additionally, the evaluation board offers inbuilt temperature sensing, current sensing, and high-voltage sensing features to provide system measurements.
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Emittierte Farbe | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chiptechnologie | 2θ50% typ.(°) | λPeak R typ.(nm) | λPeak V typ.(nm) | λDom R typ.(nm) | λDom V typ.(nm) | IV R typ.(mcd) | IV V typ.(mcd) | VF R typ.(V) | VF V typ.(V) | C | Endurance(h) | IRIPPLE(mA) | Z(mΩ) | ILeak(µA) | DF(%) | Ø D(mm) | Verpackung | Pins | Typ | G(mm) | Arbeitsspannung(V (AC)) | Betriebstemperatur | H(mm) | Betätigungskraft(g) | Elektrische Lebensdauer(Cycles) | Actuator-Farbe | Dampfphasenprozess | IR(A) | L(mH) | RDC max.(mΩ) | VR(V (DC)) | VT(V (AC)) | Material | Ø OD(mm) | L(mm) | Montageart | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMTW SMT Mono-color TOP LED Waterclear, 525 nm, Grün | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMTW SMT Mono-color TOP LED Waterclear | dominante Wellenlänge [typ.]525 nm | Emittierte FarbeGrün | Spitzen-Wellenlänge [typ.]515 nm | Lichtstärke [typ.]1200 mcd | Durchlassspannung [typ.]3.5 V | ChiptechnologieInGaN | Abstrahlwinkel Phi 0° [typ.]120 ° | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | Höhe1.3 mm | – | – | – | – | – | – | – | – | – | – | – | Länge3 mm | – | ||||
![]() | WL-SBTW SMT Bi-color TOP LED Waterclear, –, Rot & Hellgrün | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SBTW SMT Bi-color TOP LED Waterclear | – | Emittierte FarbeRot & Hellgrün | – | – | – | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]120 ° | Spitzen-Wellenlänge (Rot) [typ.]630 nm | Spitzen-Wellenlänge (Hellgrün) [typ.]572 nm | dominante Wellenlänge (Rot) [typ.]625 nm | dominante Wellenlänge (Bright Green) [typ.]570 nm | Lichtstärke (Rot) [typ.]250 mcd | Lichtstärke (Bright Green) [typ.]60 mcd | Durchlassspannung (Rot) [typ.]2 V | Durchlassspannung (Hellgrün) [typ.]2 V | – | – | – | – | – | – | – | VerpackungTape and Reel | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | Höhe1.9 mm | – | – | – | – | – | – | – | – | – | – | – | Länge3.5 mm | MontageartSMT | |||
![]() | WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ASLI Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Kapazität100 µF | Endurance 2000 | Rippelstrom300 mA | Impedanz380 mΩ | Leckstrom35 µA | Verlustfaktor14 % | Durchmesser6.3 mm | Verpackung15" Tape & Reel | – | – | – | – | Betriebstemperatur -55 °C up to +105 °C | – | – | – | – | – | – | – | – | Nennspannung35 V (DC) | – | – | – | Länge7.7 mm | MontageartV-Chip SMT | ||||
![]() | WR-PHD Stiftleisten - Zweireihig, –, – | Simulation– | Downloads7 Dateien | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWR-PHD Stiftleisten - Zweireihig | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | VerpackungTube | Pins8 | TypGerade | – | Arbeitsspannung250 V (AC) | Betriebstemperatur -40 °C up to +105 °C | – | – | – | – | – | Nennstrom3 A | – | – | – | – | – | – | Länge10.16 mm | MontageartSMT | ||
![]() | WS-TASV SMT Tact Switch 6x6 mm, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWS-TASV SMT Tact Switch 6x6 mm | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Durchmesser3.5 mm | VerpackungTape and Reel | – | – | – | – | Betriebstemperatur -40 °C up to +85 °C | Höhe5 mm | Betätigungskraft160 g | Elektrische Lebensdauer1000000 Cycles | Actuator farbeSchwarz | Dampfphasenprozessnicht spezifiziert | Nennstrom0.05 A | – | – | Nennspannung12 V (DC) | – | – | – | – | – | |||
![]() | WE-TPB HV Dreiphasen Stromkompensierte Netzdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Durchmesser4 mm | – | – | – | Pin Länge5 mm | – | Betriebstemperatur -40 °C up to +125 °C | Höhe39 mm | – | – | – | – | Nennstrom29 A | Induktivität1 mH | Gleichstromwiderstand5 mΩ | Nennspannung760 V (DC) | Prüfspannung3000 V (AC) | MaterialNanokristallin | Außendurchmesser70 mm | – | MontageartTHT | |||||
![]() | 750344945 | Flyback Transformer, –, – | Simulation– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Produktserie Flyback Transformer | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Höhe41.28 mm | – | – | – | – | – | Induktivität1.66 mH | – | – | Prüfspannung3000 V (AC) | – | – | Länge35.56 mm | MontageartTHT | ||
750319377 | Auxiliary Gate Drive Transformer, –, – | Simulation– | Downloads– | Status Neui| Produkt ist neu im Portfolio und Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Produktserie Auxiliary Gate Drive Transformer | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Betriebstemperatur -40 °C up to +125 °C | Höhe10.3 mm | – | – | – | – | – | Induktivität0.47 mH | – | – | Prüfspannung5500 V (AC) | – | – | Länge20.48 mm | MontageartSMT |