IC-Hersteller EPC

IC-Hersteller (103)

EPC EPC9193 | Demoboard EPC9193

EPC9193: 40 ARMS, 3-Phase Motor Drive Inverter

Details

TopologieMotor Drive
Eingangsspannung14-65 V
Ausgang 130 A
IC-Revision1.1

Beschreibung

The EPC9193 evaluation board is a 3-phase BLDC motor drive inverter board featuring the EPC2619 eGaN FET, rated at 100 V with 4.2 mΩ maximum RDS(on). The EPC9193 is available in two configurations. The standard configuration (EPC9193) uses a single FET for each switch position and can deliver up to 30 ARMS. The high current configuration (EPC9193HC) uses two paralleled FETS per switch position and can deliver up 60 Apk (40 ARMS maximum output current).The board can also be configured for multi-phase DC–DC conversion and the EPC2619 supports PWM switching frequencies up to 250 kHz in motor drive applications and 500 kHz in DC-DC applications.The EPC9193 contains all the necessary critical functions circuits to support a complete motor drive inverter including gate drivers, regulated auxiliary power rails for housekeeping supplies, voltage, and temperature sense, accurate current sense, and protection functions.

Eigenschaften

3-phase inverter based on EPC2619 eGaN FET with wide input DC voltage ranging from 14 V to 65 VDimensions: L x W = 130 mm x 100 mm (including connector)Low distortion switching that keeps motor audio emission low and reduces torque rippledv/dt optimized for motor drives less than 10 V/ns with option to increase dv/dt for DC–DC applicationsCurrent sense, voltage sense, temperature monitoring circuitProtection features including: over-current and input supply under voltage lockoutShaft encoder/Hall sensors interface connector for motor drive application with two voltage levels selection optionThe board can also be configured to operate as a synchronous buck DC–DC converter

Typische Anwendungen

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT
(A)
RDC max.
(mΩ)
fres
(MHz)
VersionØ ID
(mm)
VPEH
(mm)
Ø OD
(mm)
IR 1
(A)
TiTl
(mm)
Pins
(pcs)
FarbeGenderIR
(A)
Verpackung Muster
885012207085SPEC
9 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WCAP-CSGP MLCCs 50 V(DC)680 pF ±10% 50 0805 -55 °C up to +125 °C 2.510 GΩ X7R Klasse II 2 1.25 0.5 4000 0.8 7" Tape & Reel
7447785133SPEC
9 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WE-PD SMT-Speicherdrossel 6033 -40 °C up to +125 °C 5.9 6.2 33 1.05 0.9 400 17 Robust 1000 3.3
9774010243RSPEC
6 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WA-SMSI SMT Stahl Spacer mit Innengewinde M2 -55 °C up to +150 °C 1 2.8 1500 4.35 M2 Tape and Reel
60900213421SPEC
3 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WR-PHD 2.54 mm Multi-Jumper Jumper with Test Point -40 °C up to +125 °C1000 MΩ 2.44 1 Schwarz Jumper 3 Beutel
7466005RSPEC
6 Dateien Aktiv i| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.WP-SMBU REDCUBE SMT with internal through-hole thread -55 °C up to +150 °C 600 5 9 70 M5 6 70 Tape and Reel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads Status ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT
(A)
RDC max.
(mΩ)
fres
(MHz)
VersionØ ID
(mm)
VPEH
(mm)
Ø OD
(mm)
IR 1
(A)
TiTl
(mm)
Pins
(pcs)
FarbeGenderIR
(A)
Verpackung Muster