Analog Devices LTM8060 | Demoboard DC2820A

Beschreibung

Demonstration circuit 2820A features the LTM8060 μModule® regulator, a quad output high-performance step-down Silent Switcher® μModule regulator in a thermally enhanced 11.9mm × 16mm × 3.32mm BGA package. DC2820A has a wide operating input voltage range of 5.4V to 40V. The output rails are configured for 5V, 3.3V, 1.5V, 1.2V and are resistor programmable from 0.8V to 8V. Each output can provide up to 3A and phases can also be paralleled together to satisfy higher rail current requirements. The LTM8060 is a complete multioutput DC/DC point of load regulator in a compact form factor, requiring only a few input and output capacitors and resistors to set the output voltages and operating frequency. Output voltage tracking is made available by the TRSS pins for supply rail sequencing. External clock synchronization is available through the SYNC pins, CLKOUT pins provide for optional synchronization of additional phases. For reduced noise, Spread Spectrum operation is available via SYNC pin programming. The LTM8060 data sheet must be read in conjunction with the DC2820A demo manual for working on or modifying demo circuit 2820A.

Eigenschaften

• Four Complete Step-Down Switching Power Supplies
• Low Noise Silent Switcher® Architecture
• CISPR22 Class B Compliant
• CISPR25 Class 5 Compliant
• Wide Input Voltage Range: 3V to 40V
• Wide Output Voltage Range: 0.8V to 8V
• 3A Continuous Output Current per Channel at 12VIN, 3.3VOUT, TA = 80°C
• 4A Continuous Output Current per Channel at 12VIN, 3.3VOUT, fSW = 2MHz, TA = 60°C
• Multiphase or Multi-μModule Parallelable for Increased Output Current
• Low Thermal Resistance, θJA = 8.4°C/W, θJCtop = 5.0°C/W, θJCbot = 1.8°C/W
• Selectable Switching Frequency: 200kHz to 3MHz
• Compact Package

Typische Anwendungen

• Medical Equipment
• Automated Test Equipment, Industrial Supplies

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers