IC-Hersteller Analog Devices

IC-Hersteller (103)

Analog Devices LTC7897 | Demoboard EVAL-LTC7897-AZ

Wide Input and Output Voltage Synchronous Buck Controller

Details

TopologieAbwärtswandler
Eingangsspannung16-100 V
Schaltfrequenz200-240 kHz
Ausgang 112 V / 20 A

Beschreibung

The evaluation circuit EVAL-LTC7897-AZ features the LTC®7897: a 140V Low IQ Synchronous Buck Controller with Programmable 5V to 10V Gate Drive. Split gate drivers allow for easily adjustable turn-on and turn-off of FETs. User adjustable adaptive and smart dead time control modes are available for optimal gate timing. Additionally, the IC features low IQ, up to 2.5MHz programmable/synchronizable switching frequency, spread spectrum, and a small 28-lead (4mm x 5mm) QFN package. These features allow for a wide variety of applications including industrial, military, medical, and telecommunications systems.The EVAL-LTC7897-AZ operates from a 16V to 100V input voltage range and generates a 12V, 20A output (see Figure 8 in user guide). The LTC7897 has a precision voltage reference providing an output voltage with 2% tolerance over the full operating conditions. The EVAL-LTC7897-AZ is set to a 200kHz switching frequency, which results in a small and efficient circuit. The converter achieves over 93% efficiency with a 20A load at full operating VIN and peak efficiency over 96%.

Eigenschaften

Wide VIN Range: 4V to 135V (140V ABS MAX)Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 135V (140V ABS MAX)Adjustable Gate Drive Level: 5V to 10V (OPTI-DRIVE, 15V ABS MAX)Adjustable Driver Voltage UVLOAdaptive or Resistor Adjustable Dead TimesSplit-Output Gate Drivers for Adjustable Turn-On and Turn-Off Driver Strengths100% Duty Cycle OperationLow Operating IQ: 5μA (48V<IN to 3.3VOUT)Spread Spectrum Frequency ModulationProgrammable Frequency (100kHz to 2.5MHz);Synchronizable Frequency (100kHz to 2.5MHz);28-Pin (4mm x 5mm) QFN Package

Typische Anwendungen

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC max.(mΩ)
fres(MHz)
Drahttype
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Raster(mm)
Ø D(mm)
Pins
Typ
Montageart
IR(A)
Arbeitsspannung(V (AC))
Muster
WCAP-CSGP MLCCs 50 V(DC), 6.8 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität6.8 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-AT1H Aluminium-Elektrolytkondensatoren, 47 µF, ±20%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 µF
Kapazität±20% 
Nennspannung200 V (DC)
Bauform13.0 x 20.0 
Verlustfaktor15 %
Länge20 mm
VerpackungAmmopack 
Endurance 10000
Rippelstrom980 mA
Leckstrom476 µA
Raster5 mm
Durchmesser13 mm
WE-HCF SMT-Hochstrominduktivität, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform2013 
Betriebstemperatur -40 °C up to +125 °C
Länge20.8 mm
Breite20.5 mm
Höhe13.5 mm
Induktivität5.5 µH
Performance Nennstrom23.35 A
Sättigungsstrom 130 A
Sättigungsstrom @ 30%33 A
Gleichstromwiderstand4.4 mΩ
Eigenresonanzfrequenz21 MHz
DrahttypeFlach 
Pins
MontageartSMT 
Nennstrom22 A
WR-PHD Stiftleisten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge6 mm
VerpackungBeutel 
Raster2 mm
Pins
TypGerade 
MontageartTHT 
Nennstrom2 A
Arbeitsspannung200 V (AC)