Analog Devices LTC3372

Beschreibung

The LTC3372 is a highly flexible multioutput power supply IC. The device includes a high-performance, high voltage (HV) step-down DC/DC switching regulator controller that drives an all N-channel synchronous power FET stage from a 4.5V to 60V input.The LTC3372 also includes four low voltage (LV) synchronous buck regulators that can be programmed by the C1-C3 pins to share eight 1A integrated power stages in one of eight possible configurations. Each power stage is powered from independent inputs which may be connected to the HV buck’s VOUT or to other 2.25V to 5.5V supplies.The CT pin programs timing parameters of the watchdog timer and LV outputs’ Power-On Reset (RST). Precision enable thresholds facilitate reliable power-up sequencing.The LTC3372 is available in a 48-pin 7mm × 7mm QFN package.

Eigenschaften

• HV Buck Controller: VIN = 4.5V to 60V, VOUT = 5V/3.3V
• LV Buck Regulators: VINA-H = 2.25V to 5.5V, VOUT1-4 ≥ 0.8V
• 8×1A LV Buck Integrated Power Stages, Configurable as 2, 3 or 4 Output Channels
• 8 Unique Output Configurations (1A to 4A Per Channel)
• Low Total No-Load Input Supply Current (IQ)
• 15µA HV Controller Only (5VOUT)
• 23μA HV Controller Only (3.3VOUT)
• 33μA HV Controller (3.3VOUT) Plus One LV Regulator
• 9μA Per Additional LV Regulator Channel
• 1MHz to 3MHz Operation (HV Runs at 1/6 Frequency)
• Programmable or Synchronizable to External Clock
• Programmable Watchdog and Power-On Reset Delay
• IC Die Temperature Monitor Output
• Thermally Enhanced 48-Pin 7mm × 7mm QFN Package

Typische Anwendungen

• General Purpose Multi-Channel Power Supplies
• Automotive and Industrial Always-On Systems

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers