IC-Hersteller Qorvo

IC-Hersteller (96)

Qorvo ACT5101

Details

TopologieAbwärts- und Aufwärtswandler
Eingangsspannung4-23 V
Schaltfrequenz125-1000 kHz

Beschreibung

The ACT510x is a buck-boost converter with 4 integrated MOSFETs. It offers a high efficiency, low component counts, compact solution for a wide input voltage range from 4V to 23V application. The 4 internal low resistance NMOS switches minimize the size of the application circuit and reduce power losses to maximize efficiency. Internal high side gatedrivers, which require only the addition of two small external capacitors, further simplify the design process. An advanced switch control algorithm allows the buckboost converter to maintain output voltage regulation with input voltages that are above, below or equal to the output voltage. Transitions between these operating modes are seamless and free of transients and subharmonic switching.The ACT510x output voltage can be set between 3V ~23V which can be configured by either external resistor divider or I2C. The output constant current limit and cord compensation makes it flexible for any kinds of protocols like USB PD, QC 3.0/4.0 etc. The system canbe monitored and configured by I2C as well. The building ADC can be read for the information of input/output voltages and currents, die temperature, and generic input signals.ACT510x integrated a 100mA LDO output with OCP/UVLO protection to provide power for the MCU and other peripheral components inside the system.The ACT510x operation frequency can be configured from 125 kHz to 1MHz, makes the system design flexible for components size and efficiency optimization. The ACT510x has been optimized to reduce input current for applications which are sensitive to quiescent current draw, such as battery-powered devices. The AC5101 is available in 32-pin, 4 x 4 mm FCOL QFN package.

Eigenschaften

  • Buck-Boost Converter with 4 Integrated Switches
  • Wide VIN Range: 4V to 23V (No Dead Zone)
  • 3.0V to 23V Wide output Voltage Range
  • Seamless Transition between Buck and Boost Operation
  • Supports Programmable Power Supply (PPS)
  • Programmable Frequency: 125KHz, 250KHz, 500kHz, and 1MHz
  • 2V ~ 5V/100mA Programmable Output LDO
  • +/-4% Output Constant Current Regulation (@10mΩ, 3A)
  • Programmable Output Voltage and Current via both Pin and I2C
  • Enable Pin for Power On/OFF Control
  • Output Cord Compensation
  • Programmable Output Soft-Start
  • Cycle by Cycle Current Limit
  • Built in ADC for Temperature, Input and Output Voltage and Current Monitoring
  • 25mΩ FET from VIN to SW1
  • 25mΩ FET from SW2 to VOUT
  • 35mΩ FET from SW1 to PGND
  • 35mΩ FET from SW2 to PGND
  • Thermal Protection
  • Thermally Enhanced 32-Lead 4mx4mm QFN

Typische Anwendungen

  • Car Charger / Docking Stations / Multiple Power Source Supplies / DC UPS
  • Solid-State Lighting
  • Solar Powered Devices

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieL
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MontageartAnwendungInterface typIR 1
(A)
Arbeitsspannung
(V (AC))
CVR
(V (DC))
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
DF
(%)
Raster
(mm)
Ø D
(mm)
L
(mm)
Z
(mΩ)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
74439346100SPEC
8 Dateien WE-XHMI SMT Speicherdrossel 10 6.4 9.7 26.5 18 SMT -40 °C bis zu +125 °C 6.65 2 6.1 5
860010373010SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren220 µF 16 2000 -40 °C bis zu +85 °C 308 35.2 16 2.5 6.3 11 Ammopack
860010473007SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren100 µF 25 2000 -40 °C bis zu +85 °C 209 25 14 2.5 6.3 11 Ammopack
860010473011SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren220 µF 25 2000 -40 °C bis zu +85 °C 310 55 14 2.5 6.3 11 Ammopack
865080445010SPEC
8 Dateien WCAP-ASLI Aluminium-Elektrolytkondensatoren V-Chip SMT100 µF 25 2000 -55 °C bis zu +105 °C 290 25 14 6.3 7.7 380 15" Tape & Reel
61300511121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 2.54 12.7 5 Single Pin Header Gerade 3 Beutel
62900416021SPEC
7 Dateien WR-COM USB 2.0 Type A Horizontal SMT SMT USB 2.0 Type A 1.5 30 -40 °C bis zu +105 °C 4 Receptacle Horizontal 1.5 Tray
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieL
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MontageartAnwendungInterface typIR 1
(A)
Arbeitsspannung
(V (AC))
CVR
(V (DC))
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
DF
(%)
Raster
(mm)
Ø D
(mm)
L
(mm)
Z
(mΩ)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster