IC-Hersteller Qorvo

IC-Hersteller (103)

Qorvo ACT5101

Details

TopologieAbwärts- und Aufwärtswandler
Eingangsspannung4-23 V
Schaltfrequenz125-1000 kHz

Beschreibung

The ACT510x is a buck-boost converter with 4 integrated MOSFETs. It offers a high efficiency, low component counts, compact solution for a wide input voltage range from 4V to 23V application. The 4 internal low resistance NMOS switches minimize the size of the application circuit and reduce power losses to maximize efficiency. Internal high side gatedrivers, which require only the addition of two small external capacitors, further simplify the design process. An advanced switch control algorithm allows the buckboost converter to maintain output voltage regulation with input voltages that are above, below or equal to the output voltage. Transitions between these operating modes are seamless and free of transients and subharmonic switching.The ACT510x output voltage can be set between 3V ~23V which can be configured by either external resistor divider or I2C. The output constant current limit and cord compensation makes it flexible for any kinds of protocols like USB PD, QC 3.0/4.0 etc. The system canbe monitored and configured by I2C as well. The building ADC can be read for the information of input/output voltages and currents, die temperature, and generic input signals.ACT510x integrated a 100mA LDO output with OCP/UVLO protection to provide power for the MCU and other peripheral components inside the system.The ACT510x operation frequency can be configured from 125 kHz to 1MHz, makes the system design flexible for components size and efficiency optimization. The ACT510x has been optimized to reduce input current for applications which are sensitive to quiescent current draw, such as battery-powered devices. The AC5101 is available in 32-pin, 4 x 4 mm FCOL QFN package.

Eigenschaften

  • Buck-Boost Converter with 4 Integrated Switches
  • Wide VIN Range: 4V to 23V (No Dead Zone)
  • 3.0V to 23V Wide output Voltage Range
  • Seamless Transition between Buck and Boost Operation
  • Supports Programmable Power Supply (PPS)
  • Programmable Frequency: 125KHz, 250KHz, 500kHz, and 1MHz
  • 2V ~ 5V/100mA Programmable Output LDO
  • +/-4% Output Constant Current Regulation (@10mΩ, 3A)
  • Programmable Output Voltage and Current via both Pin and I2C
  • Enable Pin for Power On/OFF Control
  • Output Cord Compensation
  • Programmable Output Soft-Start
  • Cycle by Cycle Current Limit
  • Built in ADC for Temperature, Input and Output Voltage and Current Monitoring
  • 25mΩ FET from VIN to SW1
  • 25mΩ FET from SW2 to VOUT
  • 35mΩ FET from SW1 to PGND
  • 35mΩ FET from SW2 to PGND
  • Thermal Protection
  • Thermally Enhanced 32-Lead 4mx4mm QFN

Typische Anwendungen

  • Solar Powered Devices
  • Solid-State Lighting
  • Car Charger / Docking Stations / Multiple Power Source Supplies / DC UPS

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
RDC max.(mΩ)
fres(MHz)
Montageart
C
VR(V (DC))
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Raster(mm)
Ø D(mm)
L(mm)
Verpackung
Z(mΩ)
Interface typ
Typ
Gender
Pins
IR(A)
Arbeitsspannung(V (AC))
H(mm)
Betriebstemperatur
Muster
WE-XHMI SMT Speicherdrossel, 10 µH, 6.4 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität10 µH
Performance Nennstrom6.4 A
Sättigungsstrom @ 30%9.7 A
Gleichstromwiderstand26.5 mΩ
Gleichstromwiderstand29.15 mΩ
Eigenresonanzfrequenz18 MHz
MontageartSMT 
Länge6.65 mm
Pins
Nennstrom5 A
Höhe6.1 mm
Betriebstemperatur -40 °C up to +125 °C
WCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 µF
Nennspannung16 V (DC)
Endurance 2000
Rippelstrom308 mA
Leckstrom35.2 µA
Verlustfaktor16 %
Raster2.5 mm
Durchmesser6.3 mm
Länge11 mm
VerpackungAmmopack 
WCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Nennspannung25 V (DC)
Endurance 2000
Rippelstrom209 mA
Leckstrom25 µA
Verlustfaktor14 %
Raster2.5 mm
Durchmesser6.3 mm
Länge11 mm
VerpackungAmmopack 
WCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 µF
Nennspannung25 V (DC)
Endurance 2000
Rippelstrom310 mA
Leckstrom55 µA
Verlustfaktor14 %
Raster2.5 mm
Durchmesser6.3 mm
Länge11 mm
VerpackungAmmopack 
WCAP-ASLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartV-Chip SMT 
Kapazität100 µF
Nennspannung25 V (DC)
Endurance 2000
Rippelstrom290 mA
Leckstrom25 µA
Verlustfaktor14 %
Durchmesser6.3 mm
Länge7.7 mm
Verpackung15" Tape & Reel 
Impedanz380 mΩ
Betriebstemperatur -55 °C up to +105 °C
WR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartTHT 
Raster2.54 mm
Länge12.7 mm
VerpackungBeutel 
TypGerade 
GenderStiftleiste 
Pins
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
WR-USB Standard Connectors, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartSMT 
VerpackungTray 
Interface typType A 
TypHorizontal 
GenderBuchse 
Pins
Nennstrom1.5 A
Arbeitsspannung30 V (AC)
Betriebstemperatur -40 °C up to +105 °C