IC-Hersteller Qorvo

IC-Hersteller (95)

Qorvo ACT5101 | Demoboard ACT5101-101-REF01 USB PD3.0+PPS Reference Design

EZ-PD™ CCG3PA USB-C PPS 39W Dual Port Car Charger (Power Adapter) Reference Design

Details

TopologieAbwärts- und Aufwärtswandler
Eingangsspannung8-23 V
Schaltfrequenz125-1000 kHz
Ausgang 120 V / 3 A
IC-Revision1.0

Beschreibung

This document describes the characteristics and operation of the active-semi ACT5101-101-REF01 reference design. This design features a 39W car charger reference design with a 27W USB-C output and a 12W USB-A output. The document provides setup and operation instructions, schematic, layout, BOM, and test data. This Reference Design demonstrates the ACT5101QI101 power management IC plus Cypress CYPD1275-24LQXQT USB PD3.0controller.This reference design is a good starting point for designs requiring slight variations from the base design. The base design is suitable as-is for many different power profiles. The “Certifications” paragraph in this User’s Guide shows the design’s existing certifications. Many derivative requirements are easily achievable with only firmware modifications to the Cypress controller. This design has been certified for 45W on the USB-C output.This design is a joint design with active-semi and Cypress. Cypress provides additional documentation on their website here: http://www.cypress.com/documentation/reference-designs/ez-pd-ccg3pa-usb-c-pps-39wdual-port-car-charger-power-adapter.This Reference Design features a 2-output car charger application. Three major components in the design are active-semi’s ACT5101 Integrated Buck-Boost Converter, active-semi’s ACT4527 Integrated Buck Converter, and Cypress’ CCG3PA (CYPD3175-24LQXQ) USB PD controller. The CCG3PA communicates with the downstream device to negotiate required power levels. It then communicates with the ACT5101 and ACT4527 to program them to meet the required power levels.- Input Voltage = 4V to 22V- USB-C Output up to 45W- USB-A Output up to 27W

Eigenschaften

  • Buck-Boost Converter with 4 Integrated Switches
  • Wide VIN Range: 3.9V to 23V (No Dead Zone)
  • Wide VOUT Range: 3.0V to 23V
  • Supports QC3.0 / USB PD + PPS output levels and transition times
  • Programmable Frequency: 125KHz, 250KHz, 500kHz, and 1MHz
  • 2V ~ 5V/100mA Programmable Output LDO
  • Precision 0.5% Voltage Reference
  • +/-4% Output Constant Current Regulation
  • Programmable Output Voltage and Currents via both IC pins and I2C
  • Programmable Soft-Start
  • Programmable Safety Timer
  • Cycle-by-Cycle Current Limit
  • Built in ADC for Temperature, Input and Output Voltage and Current monitoring
  • Thermal Regulation and Protection
  • 25mΩ FET from VIN to SW1
  • 25mΩ FET from SW2 to VOUT
  • 35mΩ FET from SW1 to PGND
  • 35mΩ FET from SW2 to PGND
  • Thermally Enhanced 32-Lead 4mx4mm QFN

Typische Anwendungen

  • Solar Powered Devices
  • 24V Industrial Applications
  • Multiple Power Source Supplies / DC UPS
  • Power Bank
  • Car Charger / Automotive Power Systems
  • Solid-State Lighting

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MontageartAnwendungInterface typIR 1
(A)
Arbeitsspannung
(V (AC))
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
Z
(mΩ)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
885012206061SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)2.2 nF ±10% 25 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206067SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)22 nF ±10% 25 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206069SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)47 nF ±10% 25 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206020SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)100 nF ±10% 10 0603 -55 °C up to +125 °C 55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206026SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)1 µF ±10% 10 0603 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207079SPEC
7 Dateien WCAP-CSGP MLCCs 25 V(DC)2.2 µF ±10% 25 0805 -55 °C up to +125 °C 100.05 GΩ X7R Klasse II 2 1.25 0.5 1.25 7" Tape & Reel
860010473007SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren100 µF ±20% 25 14 11 2000 -40 °C bis zu +85 °C 209 25 2.5 6.3 Ammopack
865080445010SPEC
7 Dateien WCAP-ASLI Aluminium-Elektrolytkondensatoren100 µF ±20% 25 6.3 x 7.7 -55 °C up to +105 °C 141 MΩ 7.7 6.6 V-Chip SMT 2000 -55 °C bis zu +105 °C 290 25 6.3 380 15" Tape & Reel
860010373010SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren220 µF ±20% 16 16 11 2000 -40 °C bis zu +85 °C 308 35.2 2.5 6.3 Ammopack
860010473011SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren220 µF ±20% 25 14 11 2000 -40 °C bis zu +85 °C 310 55 2.5 6.3 Ammopack
61300511121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 12.7 THT 250 2.54 5 Single Pin Header Gerade 3 Beutel
62900416021SPEC
7 Dateien WR-COM USB 2.0 Type A Horizontal SMT -40 °C up to +105 °C1000 MΩ SMT USB 2.0 Type A 1.5 30 -40 °C bis zu +105 °C 4 Receptacle Horizontal 1.5 Tray
74439346100SPEC
8 Dateien WE-XHMI SMT Speicherdrossel 6060 -40 °C up to +125 °C 6.65 6.45 10 6.4 9.7 26.5 18 SMT -40 °C bis zu +125 °C 2 6.1 5
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MontageartAnwendungInterface typIR 1
(A)
Arbeitsspannung
(V (AC))
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
Z
(mΩ)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster