de

Warenkorb

Ihr Warenkorb ist leer.

IC-Referenzdesignsuche

MaxLinear ANP-47

Details

TopologieSonstige Topologie
IC-Revision1A

Beschreibung

A well laid out PCB does not radiate much EMI all by itself from the current carrying traces. In order to get EMI compliance a PCB should have:- Ideally six layer PCB with two full ground planes. Four layer PCBs are okay.- Make sure there is sufficient vias between the ground planes.- Make sure to minimize the switching current loops on the board.- Current carrying traces must be kept as short as possible and running on a layer close to the ground plane.- Power ground plane and the signal ground must be connected at only one point.

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Downloads ProduktserieZ @ 100 MHz
(Ω)
Zmax
(Ω)
Testbedingung ZmaxIR
(mA)
RDC typ.
(mΩ)
Z @ 1 GHz
(Ω)
H
(mm)
Typ Muster
74279226101SPEC
9 Dateien WE-MPSB EMI Multilayer Power Suppression Bead 100 160 1100 MHz 8000 4.5 150 2.3 High Current
Artikel Nr. Daten­blatt
74279226101SPEC
Muster
Artikel Nr. Daten­blatt Downloads ProduktserieZ @ 100 MHz
(Ω)
Zmax
(Ω)
Testbedingung ZmaxIR
(mA)
RDC typ.
(mΩ)
Z @ 1 GHz
(Ω)
H
(mm)
Typ Muster