IC-Hersteller Infineon Technologies

IC-Hersteller (103)

Infineon Technologies ICL8105 | Demoboard ICL8105 Evaluat ion System

Digi tal Flyback Cont rol ler IC

Details

TopologieSperrwandler
Eingangsspannung90-277 V
Ausgang 148 V / 0.4 A
IC-Revision1.0

Beschreibung

The ICL8105 universal evaluation board is designed to offer designers maximum flexibility in terms of design during the initial design phase. It provides a flexible base for evaluating the performance of the ICL8105. Theobjective of this board is to allow the designer a faster way to finalize the circuitry and component values before designing the form factor PCB. By default, it is configured as a single-stage PFC flyback topology.Tuning of power factor (PF), total harmonic distortion (THD) and electromagnetic interference (EMI) is possible with the adjustable input/output capacitance and the option of using different line filters.The controller provides the ability to use different transformers, allowing easy adaptation for different power applications (20 W, 40 W, 60 W and 80 W). The availability of different footprints of the MOSFET andoutput diode allows the designer to choose the most cost-effective solution.The output voltage can be tuned by enabling/disabling the VCC voltage regulator circuitry. Synchronous rectification circuitry is available for selection in the case of high-efficiency applications. Designers canchoose to use an active or passive output bleeder to support hot-plug of LEDs and to protect LEDs against overvoltage when being reconnected.Current (IVcc, Ipri, Isec) can be measured easily across a jumper. Test pins are placed in strategic points for easy hook-up with oscilloscope probes for testing and measurement.

Eigenschaften

  • Universal AC input from 90 V~ to 305 V~
  • DC input option
  • Wide output voltage range: 20 V to 100 V
  • Output current: 0.1 A to 2.0 A
  • Tunable output voltage range:Wide/narrow/fixed
  • High efficiency with optional synchronous rectification
  • Selectable input and output capacitors
  • 0 – 10 V dimming with isolation support
  • Low standby power < 200 mW
  • Power rating option (20 W, 40 W, 60 W, 80 W)
  • Various footprint options for MOSFET/diode
  • Open load auto discharge
  • Configurable parameters, e.g. adjustable voltage and current ranges, protection modes

Typische Anwendungen

  • Electronic control gear for LED luminaires (20 W, 40 W, 60 W, 80 W)

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
Pins
Version
Typ
Montageart
L(mm)
Betriebstemperatur
Verpackung
H(mm)
Betätigungskraft(g)
Elektrische Lebensdauer(Cycles)
Actuator-Farbe
Waschbar
Dampfphasenprozess
L(µH)
IR(A)
RDC max.(Ω)
Muster
WL-TMRW THT Mono-color Round Waterclear, 621 nm, Rot
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]621 nm
FarbeRot 
Spitzen-Wellenlänge [typ.]628 nm
Lichtstärke [typ.]2600 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]30 °
MontageartTHT 
Länge3 mm
Betriebstemperatur -40 °C up to +85 °C
VerpackungLose 
Höhe5.3 mm
WE-FI Funkentstördrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartTHT 
Länge25 mm
Betriebstemperatur -40 °C up to +105 °C
Induktivität470 µH
Nennstrom3 A
Gleichstromwiderstand0.11 Ω
WS-TATV THT Tact Switch 6x6 mm, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +85 °C
VerpackungLose 
Höhe9.5 mm
Betätigungskraft260 g
Elektrische Lebensdauer200000 Cycles
Actuator farbeWeiß 
WaschbarNein 
Dampfphasenprozessnicht spezifiziert 
Nennstrom0.05 A
WR-BHD 2.54 mm Wannenstiftleiste, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
VersionLow Profile 
TypGerade 
MontageartTHT 
Länge17.82 mm
Betriebstemperatur -40 °C up to +105 °C
VerpackungTray 
Nennstrom3 A
750314100
Transformer, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Transformer
MontageartTHT 
Länge23.36 mm
Betriebstemperatur -40 °C up to +125 °C
VerpackungTray 
Höhe24.14 mm
Induktivität540 µH
750314131
Flyback Transformer, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Flyback Transformer
750342294
Transformer, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Transformer
MontageartTHT 
Länge27.05 mm
Betriebstemperatur -40 °C up to +125 °C
VerpackungTray 
Höhe22.86 mm
Induktivität1600 µH
750342295
Transformer, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Transformer
MontageartTHT 
Länge39.6 mm
Betriebstemperatur -40 °C up to +125 °C
VerpackungTray 
Höhe30.48 mm
Induktivität310 µH