IC-Hersteller Infineon Technologies

IC-Hersteller (107)

Infineon Technologies ICL8105 | Demoboard ICL8105 Evaluat ion System

Digi tal Flyback Cont rol ler IC

Details

TopologieSperrwandler
Eingangsspannung90-277 V
Ausgang 148 V / 0.4 A
IC-Revision1.0

Beschreibung

The ICL8105 universal evaluation board is designed to offer designers maximum flexibility in terms of design during the initial design phase. It provides a flexible base for evaluating the performance of the ICL8105. Theobjective of this board is to allow the designer a faster way to finalize the circuitry and component values before designing the form factor PCB. By default, it is configured as a single-stage PFC flyback topology.Tuning of power factor (PF), total harmonic distortion (THD) and electromagnetic interference (EMI) is possible with the adjustable input/output capacitance and the option of using different line filters.The controller provides the ability to use different transformers, allowing easy adaptation for different power applications (20 W, 40 W, 60 W and 80 W). The availability of different footprints of the MOSFET andoutput diode allows the designer to choose the most cost-effective solution.The output voltage can be tuned by enabling/disabling the VCC voltage regulator circuitry. Synchronous rectification circuitry is available for selection in the case of high-efficiency applications. Designers canchoose to use an active or passive output bleeder to support hot-plug of LEDs and to protect LEDs against overvoltage when being reconnected.Current (IVcc, Ipri, Isec) can be measured easily across a jumper. Test pins are placed in strategic points for easy hook-up with oscilloscope probes for testing and measurement.

Eigenschaften

  • Universal AC input from 90 V~ to 305 V~
  • DC input option
  • Wide output voltage range: 20 V to 100 V
  • Output current: 0.1 A to 2.0 A
  • Tunable output voltage range:Wide/narrow/fixed
  • High efficiency with optional synchronous rectification
  • Selectable input and output capacitors
  • 0 – 10 V dimming with isolation support
  • Low standby power < 200 mW
  • Power rating option (20 W, 40 W, 60 W, 80 W)
  • Various footprint options for MOSFET/diode
  • Open load auto discharge
  • Configurable parameters, e.g. adjustable voltage and current ranges, protection modes

Typische Anwendungen

  • Electronic control gear for LED luminaires (20 W, 40 W, 60 W, 80 W)

Weiterführende Informationen

Von Infineon Technologies freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
Pins
Version
Typ
Montageart
L(mm)
Betriebstemperatur
Verpackung
H(mm)
Betätigungskraft(g)
Elektrische Lebensdauer(Cycles)
Actuator-Farbe
Waschbar
Dampfphasenprozess
L(µH)
IR(A)
RDC max.(Ω)
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWL-TMRW THT Mono-color Round Waterclear, 621 nm, Rot
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]621 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]628 nm
Lichtstärke [typ.]2600 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]30 °
MontageartTHT 
Länge3 mm
Betriebstemperatur -40 °C up to +85 °C
VerpackungLose 
Höhe5.3 mm
Verfügbarkeit prüfen
SPECWE-FI Funkentstördrossel, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartTHT 
Länge25 mm
Betriebstemperatur -40 °C up to +105 °C
Induktivität470 µH
Nennstrom3 A
Gleichstromwiderstand0.11 Ω
Verfügbarkeit prüfen
SPECWS-TATV THT Tact Switch 6x6 mm, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +85 °C
VerpackungLose 
Höhe9.5 mm
Betätigungskraft260 g
Elektrische Lebensdauer200000 Cycles
Actuator farbeWeiß 
WaschbarNein 
Dampfphasenprozessnicht spezifiziert 
Nennstrom0.05 A
Verfügbarkeit prüfen
SPECWR-BHD 2.54 mm Wannenstiftleiste, –, –

Anstehende PCN

Aufgrund einer anstehenden PCN wird sich in Kürze das Datenblatt des ausgewählten Produktes ändern. Anbei finden Sie das neue Datenblatt, sowie das noch gültige Datenblatt. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter.

Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
VersionLow Profile 
TypGerade 
MontageartTHT 
Länge17.82 mm
Betriebstemperatur -40 °C up to +105 °C
VerpackungTray 
Nennstrom3 A
Verfügbarkeit prüfen
750314100
SPECTransformer, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Transformer
MontageartTHT 
Länge23.36 mm
Betriebstemperatur -40 °C up to +125 °C
VerpackungTray 
Höhe24.14 mm
Induktivität540 µH
Verfügbarkeit prüfen
750314131
SPECFlyback Transformer, –, –
Simu­lation
Verfügbarkeit
Downloads
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Flyback Transformer
Verfügbarkeit prüfen
750342294
SPECTransformer, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Transformer
MontageartTHT 
Länge27.05 mm
Betriebstemperatur -40 °C up to +125 °C
VerpackungTray 
Höhe22.86 mm
Induktivität1600 µH
Verfügbarkeit prüfen
750342295
SPECTransformer, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Transformer
MontageartTHT 
Länge39.6 mm
Betriebstemperatur -40 °C up to +125 °C
VerpackungTray 
Höhe30.48 mm
Induktivität310 µH
Verfügbarkeit prüfen