IC-Hersteller Infineon Technologies

IC-Hersteller (96)

Infineon Technologies ICE5QSAG

60 W 12 V 5 V SMPS demo board with ICE5QSAG and IPA80R600P7

Details

TopologieSperrwandler
Eingangsspannung85-300 V
Schaltfrequenz41 kHz
Ausgang 15 V / 1 A
Ausgang 212 V / 4.58 A
IC-RevisionER_ 201710_PL83_001 V1.0

Beschreibung

This engineering report is a 60 W 12 V and 5 V demo board designed in a QR Flyback converter topology using the fifth-generation QR controller ICE5QSAG and a P7 series of HV CoolMOS™ IPA80R600P7. The target applications of ICE5QSAG are either auxiliary power supplies for white goods, PCs, servers and TVs, or enclosed adapters for Blu-ray players, set-top boxes, games consoles, etc. The new improved digital frequency reduction with proprietary QR operation offers lower EMI and higher efficiency for a wide AC range by reducing the switching frequency difference between low- and high-line. The enhanced Active Burst Mode (ABM) power enables flexibility in standby power operation range selection and QR operation during ABM. As a result, the system efficiency, over the entire load range, is significantly improved compared to conventional free-running QR converters implemented with only maximum switching frequency limitation at light load. In addition, numerous adjustable protection functions have been implemented in ICE5QSAG to protect the system and customize the IC for the chosen application. In case of failure modes like brown-out or line Over Voltage (OV), VCC OV/Under Voltage (UV), open control-loop or over-load, output OV, over-temperature, VCC short-to-GND and CS short-to-GND, the device enters protection mode. By means of the cycle-by-cycle Peak Current Limitation, the dimensions of the transformer and the current rating of the secondary diode can both be optimized. In this way, a cost-effective solution can easily be achieved.

Eigenschaften

  • Novel Quasi-Resonant switching scheme
  • Rapid and adjustable start-up with cascode configuration
  • 2 level selectable active burst mode level
  • Built-in digital soft-start
  • Cycle by cycle peak current limitation
  • Digital frequency reduction with decreasing load for higher efficiency
  • Adjustable line input over-voltage and brown IN/OUT protection
  • VCC and CS pin short to ground protection
  • OLP, output short, output over-voltage, OTP with hysteresis and V CC over/under voltage protection
  • Auto-restart for all protection features

Typische Anwendungen

  • Offline main SMPS for adapter, set-top-box, water purifier, TV, industrial SMPS and POE
  • Offline aux SMPS for server, PC power, aircon, refrigerator and audio

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktseriePinsAnwendungPCB/Kabel/PanelModularityTypWire SectionL
(µH)
IR
(A)
ISAT
(A)
RDC max.
(Ω)
fres
(MHz)
Version Muster
691102710002SPEC
6 Dateien WR-TBL Series 102 - 5.00 mm Horizontal Entry Modular 2 Wire Protector PCB Ja Horizontal 22 to 14 (AWG) 0.75 to 1.5 (mm²) 17.5
691412120002BSPEC
6 Dateien WR-TBL Series 412B - 3.50 mm Screwless 45° Entry - 2.1 mm 2 Wires 2 Screwless PCB Nein 45° 14 to 20 (AWG) 2.08 to 0.518 (mm²) 2
7447462047SPEC
8 Dateien WE-TI Tonneninduktivität 4.7 4.2 3.7 0.03 40 Schrumpfschlauch
750343773SPEC
5 Dateien Transformer 266
Artikel Nr. Daten­blatt Simu­lation
691102710002SPEC
691412120002BSPEC
7447462047SPEC
750343773SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktseriePinsAnwendungPCB/Kabel/PanelModularityTypWire SectionL
(µH)
IR
(A)
ISAT
(A)
RDC max.
(Ω)
fres
(MHz)
Version Muster