Filter Stick USB 2.0 Type A EMC

Order Code 829999STICK

Filter Stick USB 2.0 Type A EMC

Characteristics

  • Ready fabricated and populated USB 2.0 filter stick for test purposes
  • Fast testing of the filter effect on the system under test
  • Straightforward design implementation through BOM and layout files
  • Prevention of negative influence on the operating behavior due to interference emissions, electrostatic discharges (ESD) and fast transients (burst)
  • Data rate upto 450 Mbps
  • Up to 2.5 W (500 mA @ 5 V)
  • Filtering directly at the interface

Applications

  • Universal Serial Bus (USB) 2.0 Type A application

PCB layout files

The USB 2.0 EMC and ESD solution can be easily integrated into designs. PCB layout files (Gerber) can be downloaded here.

Download Gerber File here

Products

Filter article data
Filter by
 show  article in 0 product lines
 article in 0 product lines
Reset all
Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Samples
WE-CBF SMT EMI Suppression Ferrite Bead
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
WE-CNSW SMT Common Mode Line Filter
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
WE-TVS TVS Diode – High Speed Series
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
WCAP-CSGP MLCCs 16 V(DC)
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
WR-USB Standard Connectors
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
WR-USB Standard Connectors
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.

Plug and Play!

Plug and Play!

To avoid reduced integrity of the data transfer due to interference and to pass EMC tests, components matched to the data lines are necessary.

For simplified implementation, the adapter stick was designed, which contains a complete filter circuit for the selected application. The filter stick is plugged into the corresponding interface for test purposes. If the test is passed with the filter stick plugged in, the filter circuit can be integrated into the system.

  1. Plug in filter stick
  2. Check filter effect
  3. Implement the circuit in the system
A picture of Filter Stick USB 2.0 Typ A EMV

Filterperformance

Filter Stick USB 2.0 Typ A EMV Power Line Attenuation
Power Line Attenuation
  • T-filter (WE-CBF and WCAP-CSGP) for optimal impedance adjustment
  • Suppression of Vcc line noise
Filter Stick USB 2.0 Type A EMC Data Line Impedance Common Mode
Data Line Impedance Common Mode
  • High common mode impedance for suppression of common mode interference by common mode choke (WE-CNSW)
Filter Stick USB 2.0 Type A EMC Data Line Impedance Differential Mode
Data Line Impedance Differential Mode
  • No influence on the data signal due to the low impedance at low frequencies