| Topology | Power Factor Correction |
| Input voltage | 90-264 V |
| Output 1 | 24 V / 10 A |
| IC revision | A |
This reference design is an AC/DC power supply design with critical conduction mode (CRM) PFC and half-bridge LLC series resonant converter that provides 24 V, 240-W continuous, 336-W peak output from a universal input AC voltage (90 VAC to 264 VAC). This design uses UCC28056 CRM/DCM PFC controller, UCC256404 enhanced LLC controller, and UCC24612-2 synchronous rectifier controller with burst mode enabled for low standby power losses. The design achieves 87 mW at 115 VAC and 124 mW at 230 VAC, and it also achieves 93.4% peak efficiency at 115-VAC input and 95.3% peak efficiency at 230-VAC input. The efficiency and power factor numbers also meet both 115-V and 230-V internal 80 PLUS Platinum specifications and DoE level VI requirements.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | C | Safety Class | dV/dt(V/µs) | DF @ 1 kHz(%) | RISO | Pitch(mm) | Packaging | Tol. C | Size | Operating Temperature | DF(%) | Ceramic Type | Fl(mm) | IR(A) | L(mH) | RDC max.(mΩ) | VR(V (AC)) | VT(V (AC)) | Material | L(mm) | W(mm) | H(mm) | Mount | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WCAP-FTX2 Film Capacitors, Across the mains, 220 nF | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-FTX2 Film Capacitors | Capacitance220 nF | Safety ClassX2 | Rate of Voltage Rise300 V/µs | Dissipation Factor0.1 % | Insulation Resistance30 GΩ | Pitch10 mm | PackagingCarton | Capacitance±10% | SizePitch 10 mm | Operating Temperature -40 °C up to +105 °C | – | – | – | – | – | – | Rated Voltage275 V (AC) | – | – | Length13 mm | Width8 mm | Height14 mm | MountBoxed THT | ||||
![]() | WCAP-FTX2 Film Capacitors, Across the mains, 470 nF | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-FTX2 Film Capacitors | Capacitance470 nF | Safety ClassX2 | Rate of Voltage Rise280 V/µs | Dissipation Factor0.1 % | Insulation Resistance21.28 GΩ | Pitch12.5 mm | PackagingBulk | Capacitance±10% | SizePitch 12.5 mm | Operating Temperature -40 °C up to +105 °C | – | – | – | – | – | – | Rated Voltage275 V (AC) | – | – | Length15 mm | Width10 mm | Height16 mm | MountBoxed THT | ||||
![]() | WE-CMB Common Mode Power Line Choke, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CMB Common Mode Power Line Choke | – | – | – | – | – | – | – | – | SizeType S | Operating Temperature -40 °C up to +125 °C | – | – | – | Rated Current3 A | Inductance1 mH | DC Resistance35 mΩ | Rated Voltage250 V (AC) | Insulation Test Voltage1500 V (AC) | MaterialMnZn | Length17.5 mm | Width13 mm | Height22 mm | MountTHT | ||||
![]() | WE-CMB Common Mode Power Line Choke, –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-CMB Common Mode Power Line Choke | – | – | – | – | – | – | – | – | SizeL | Operating Temperature -40 °C up to +125 °C | – | – | – | Rated Current3 A | Inductance10 mH | DC Resistance105 mΩ | Rated Voltage250 V (AC) | Insulation Test Voltage1500 V (AC) | MaterialMnZn | Length27.5 mm | Width18.5 mm | Height33 mm | MountTHT | ||||
![]() | WE-FI Leaded Toroidal Line Choke, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-FI Leaded Toroidal Line Choke | – | – | – | – | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | – | Rated Current2.5 A | Inductance0.1 mH | DC Resistance80 mΩ | – | – | – | Length16.5 mm | Width9.7 mm | – | MountTHT | |||
| WCAP-CSGP MLCCs 16 V(DC), –, 10 nF | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | Capacitance10 nF | – | – | – | Insulation Resistance10 GΩ | – | Packaging7" Tape & Reel | Capacitance±10% | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor3.5 % | Ceramic TypeX7R Class II | Pad Dimension0.4 mm | – | – | – | Rated Voltage16 V (AC) | – | – | Length1.6 mm | Width0.8 mm | Height0.8 mm | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), –, 220 nF | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | Capacitance220 nF | – | – | – | Insulation Resistance2.3 GΩ | – | Packaging7" Tape & Reel | Capacitance±10% | Size0603 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Ceramic TypeX7R Class II | Pad Dimension0.4 mm | – | – | – | Rated Voltage16 V (AC) | – | – | Length1.6 mm | Width0.8 mm | Height0.8 mm | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), –, 2.2 µF | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | Capacitance2.2 µF | – | – | – | Insulation Resistance0.05 GΩ | – | Packaging7" Tape & Reel | Capacitance±20% | Size0603 | Operating Temperature -55 °C up to +85 °C | Dissipation Factor10 % | Ceramic TypeX5R Class II | Pad Dimension0.4 mm | – | – | – | Rated Voltage16 V (AC) | – | – | Length1.6 mm | Width0.8 mm | Height0.8 mm | – | |||||
750317259 | PFC Inductor, –, – | Simulation– | Downloads– | Status Activei| Production is active. Expected lifetime: >10 years. | Product series PFC Inductor | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ||
750317258 | Transformer, –, – | Simulation– | Downloads– | Status Activei| Production is active. Expected lifetime: >10 years. | Product series Transformer | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |