| Topology | Buck Converter |
| Input voltage | 5 V |
| Switching frequency | 1200-1900 kHz |
| Output 1 | 3.3 V |
| IC revision | 4 |
The ST1S31 device is an internally compensated 1.5 MHz fixed-frequency PWM synchronous stepdown regulator. The ST1S31 operates from 2.8 V to 5.5 V input, while it regulates an output voltage as low as 0.8 V and up to VIN. The ST1S31 integrates a 60 mΩ high-side switch and a 45 mΩ synchronous rectifier allowing very high efficiency with very low output voltages. The peak current mode control with internal compensation delivers a very compact solution with a minimum component count. The ST1S31 device is available in 3 mm x 3 mm, 8 lead VFDFPN and SO8 packages.
Order Code | Datasheet | Simulation | Downloads | Status | Product series | L(µH) | IRP,40K(A) | ISAT,10%(A) | ISAT,30%(A) | RDC(mΩ) | fres(MHz) | Material | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WE-HCI SMT Flat Wire High Current Inductor, 2.2 µH, 9.2 A | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-HCI SMT Flat Wire High Current Inductor | Inductance2.2 µH | Performance Rated Current9.2 A | Saturation Current @ 10%3.5 A | Saturation Current @ 30%7.5 A | DC Resistance11.3 mΩ | Self Resonant Frequency108 MHz | MaterialSuperflux | ||||
![]() | WE-HCI SMT Flat Wire High Current Inductor, 2.2 µH, 10.2 A | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-HCI SMT Flat Wire High Current Inductor | Inductance2.2 µH | Performance Rated Current10.2 A | Saturation Current @ 10%5.6 A | Saturation Current @ 30%13 A | DC Resistance11.4 mΩ | Self Resonant Frequency52 MHz | MaterialSuperflux |