IC manufacturers STMicroelectronics

IC manufacturers (103)

STMicroelectronics SPC58EE84E7 | Demoboard STEVAL-TTM004V1

5 kW low voltage high current inverter for automotive motor control applications

Overview

TopologyOther Topology
Input voltage48 V

Description

Waiting for updated information online!!The STEVAL-TTM001V1 evaluation kit is designed to demonstrate the highly efficient ST automotive-grade 100 V STripFET F7 series Power MOSFETs and BLDC motordriver IC operating in typical automotive low voltage (car battery up to 48 V), high current motor control applications.The kit has two boards to sense and condition currents and a driver board with a programmable L9907 FET driver with full diagnostics to manage all 36 STH315N10F7 Power MOSFETs on a separate power board also included in the kit.The driver board also includes an ST motor control connector to interface with any compatible ST motor control board (not included in the kit), and various other connectors and jumpers for monitoring and protection, motor position feedbackinformation, and auxiliary power.

Features

  • Low voltage, high current inverter kit with the following boards (not available separately)
  • Power board with the following features:– insulated metal substrate (IMS) for efficient cooling– hosts 36 STH315N10F7 power MOSFETs in the H²PAK-6 (6 switch) package– Decoupling gate resistors (2.2 Ω)– 3-shunt resistors ground referred for current sensing (optional)– 3 NTCs for thermal protection
  • Driver board with the following features:– Based on L9907 three phase gate driver AEC-Q100 qualified– 34-pin Motor Control connector– Full diagnostic via SPI– Current sense amplifiers– overvoltage, undervoltage and overcurrent with VDS drop monitoring, overtemperature and shutdown– Programmable gate current capability
  • Bulk capacitor board
  • Current sensing board

Typical applications

  • 3-phase BLDC Motor Control

More information

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
C
Tol. C
VR(V (DC))
Size
Operating Temperature
DF(%)
RISO
Ceramic Type
L(mm)
W(mm)
H(mm)
Fl(mm)
Packaging
L(µH)
Qmin.
IR(mA)
ISAT(A)
fres(MHz)
Version
Z @ 100 MHz(Ω)
Zmax(Ω)
Test Condition Zmax
IR 2(mA)
RDC max.(Ω)
Type
Z @ 1 GHz(Ω)
Samples
WCAP-CSGP MLCCs 25 V(DC), 4.7 nF, ±10%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance4.7 nF
Capacitance±10% 
Rated Voltage25 V (DC)
Size0603 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor3.5 %
Insulation Resistance10 GΩ
Ceramic TypeX7R Class II 
Length1.6 mm
Width0.8 mm
Height0.8 mm
Pad Dimension0.4 mm
Packaging7" Tape & Reel 
Q-Factor [1]600 
WCAP-CSGP MLCCs 25 V(DC), 470 nF, ±10%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance470 nF
Capacitance±10% 
Rated Voltage25 V (DC)
Size0603 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor10 %
Insulation Resistance1.1 GΩ
Ceramic TypeX7R Class II 
Length1.6 mm
Width0.8 mm
Height0.8 mm
Pad Dimension0.4 mm
Packaging7" Tape & Reel 
Q-Factor [1]600 
WCAP-CSGP MLCCs 16 V(DC), 1 µF, ±10%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance1 µF
Capacitance±10% 
Rated Voltage16 V (DC)
Size0603 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor10 %
Insulation Resistance0.1 GΩ
Ceramic TypeX7R Class II 
Length1.6 mm
Width0.8 mm
Height0.8 mm
Pad Dimension0.4 mm
Packaging7" Tape & Reel 
Q-Factor [1]600 
WCAP-CSGP MLCCs 10 V(DC), 4.7 µF, ±20%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance4.7 µF
Capacitance±20% 
Rated Voltage10 V (DC)
Size0603 
Operating Temperature -55 °C up to +85 °C
Dissipation Factor10 %
Insulation Resistance0.02 GΩ
Ceramic TypeX5R Class II 
Length1.6 mm
Width0.8 mm
Height0.8 mm
Pad Dimension0.4 mm
Packaging7" Tape & Reel 
Q-Factor [1]600 
WCAP-CSGP MLCCs 16 V(DC), 10 µF, ±20%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance10 µF
Capacitance±20% 
Rated Voltage16 V (DC)
Size0805 
Operating Temperature -55 °C up to +85 °C
Dissipation Factor10 %
Insulation Resistance0.01 GΩ
Ceramic TypeX5R Class II 
Length2 mm
Width1.25 mm
Height1.25 mm
Pad Dimension0.5 mm
Packaging7" Tape & Reel 
Q-Factor [1]600 
WE-CBF SMT EMI Suppression Ferrite Bead, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Size0603 
Operating Temperature -55 °C up to +125 °C
Length1.6 mm
Width0.8 mm
Height0.8 mm
Pad Dimension0.3 mm
Rated Current1500 mA
VersionSMT 
Impedance @ 100 MHz120 Ω
Maximum Impedance180 Ω
Maximum Impedance400 MHz 
Rated Current 22000 mA
DC Resistance0.05 Ω
TypeHigh Current 
Impedance @ 1 GHz146 Ω
WE-CBF HF SMT EMI Suppression Ferrite Bead (High Frequency), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Size0603 
Operating Temperature -55 °C up to +125 °C
Length1.6 mm
Width0.8 mm
Height0.8 mm
Pad Dimension0.3 mm
Rated Current500 mA
VersionSMT 
Impedance @ 100 MHz600 Ω
Maximum Impedance950 Ω
Maximum Impedance600 MHz 
Rated Current 2500 mA
DC Resistance0.35 Ω
TypeHigh Current 
Impedance @ 1 GHz800 Ω
WE-PD2SR Power Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Size7845 
Operating Temperature -40 °C up to +125 °C
Length7.8 mm
Width7 mm
Height4.8 mm
Inductance8.2 µH
Rated Current2700 mA
Saturation Current2.8 A
Self Resonant Frequency28 MHz
VersionSMT 
DC Resistance0.039 Ω