IC manufacturers Sanken Electric Co., Ltd.

IC manufacturers (103)

Sanken Electric Co., Ltd. STR3A453D | Demoboard 0009

Overview

TopologyBuck Converter
Input voltage85-265 V
Output 116.05 V / 0.7 A
IC revision1.0

Description

The STR3A453D is a power IC for switching power supplies, incorporating a power MOSFET and a current-mode PWM controller IC.The product achieves low power consumption and low standby power by including a startup circuit and a standby function that automatically switch operation modes – PWM mode in normal operation and burst-oscillation mode under light-load conditions. Its enhanced protection functions also enable higher cost-effective power supply systems with few external components.

Features

  • Low Thermal Resistance Package
  • Improving circuit efficiency (Since the step drive control can keep VRM of secondary rectification diodes low, the circuit efficiency can be improved by low VF.)
  • Current Mode Type PWM Control
  • Soft Start Function
  • Auto Standby Function No Load Power Consumption < 15mW
  • Operation Mode Normal Operation: PWM Mode Light Load Operation: Green-Mode Standby: Burst Oscillation Mode
  • Random Switching Function
  • Slope Compensation Function
  • Leading Edge Blanking Function
  • Bias Assist Function
  • Protections Overcurrent Protection (OCP): Pulse-by-Pulse Overload Protection (OLP): Auto-restart Overvoltage Protection (OVP): Auto-restart Thermal Shutdown (TSD): Auto-restart with hysteresis

Typical applications

  • AC/DC adapter
  • White goods, Other SMPS

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
C
Safety Class
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Pitch(mm)
Packaging
Tol. C
Size
Operating Temperature
DF(%)
Ceramic Type
Fl(mm)
ISAT,10%(A)
fres(MHz)
Version
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
Pins
Type
G(mm)
Working Voltage(V (AC))
IR(A)
L(mH)
RDC max.(Ω)
VR(V (AC))
VT(V (AC))
Material
L(mm)
W(mm)
H(mm)
Mount
Samples
WCAP-FTXX Film Capacitors, Across the mains, 100 nF
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance100 nF
Safety ClassX2 
Rate of Voltage Rise300 V/µs
Dissipation Factor0.1 %
Insulation Resistance30 GΩ
Pitch10 mm
PackagingCarton 
Capacitance±10% 
SizePitch 10 mm 
Operating Temperature -40 °C up to +105 °C
Pin length4 mm
Rated Voltage310 V (AC)
Length13 mm
Width7 mm
Height13 mm
MountBoxed THT 
WE-TFC Common Mode Power Line Choke, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
SizeUU 9.8 V 
Operating Temperature -40 °C up to +125 °C
Pins
Pin length3.5 mm
Rated Current0.4 A
Inductance12 mH
DC Resistance2 Ω
Rated Voltage300 V (AC)
Insulation Test Voltage2500 V (AC)
MaterialMnZn 
Length17 mm
Width11.5 mm
Height17 mm
MountTHT 
WE-TI Radial Leaded Wire Wound Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Size1018 
Operating Temperature -40 °C up to +125 °C
Saturation Current @ 10%2.1 A
Self Resonant Frequency2.4 MHz
VersionHeat Shrinking Tube 
Rated Current1.75 A
Inductance0.22 mH
DC Resistance0.2 Ω
MaterialNiZn 
Length11 mm
Width11 mm
Height19 mm
MountTHT 
WCAP-ATG5 Aluminum Electrolytic Capacitors, –, 22 µF
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance22 µF
Pitch2 mm
PackagingAmmopack 
Capacitance±20% 
Dissipation Factor10 %
Endurance 2000
Ripple Current60 mA
Leakage Current11 µA
Diameter5 mm
Rated Voltage50 V (AC)
Length11 mm
WCAP-ATLI Aluminum Electrolytic Capacitors, –, 470 µF
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance470 µF
Pitch5 mm
PackagingAmmopack 
Capacitance±20% 
Dissipation Factor10 %
Endurance 5000
Ripple Current1415 mA
Leakage Current117.5 µA
Diameter10 mm
Rated Voltage25 V (AC)
Length16 mm
WCAP-CSGP MLCCs 50 V(DC), –, 1 nF
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance1 nF
Insulation Resistance10 GΩ
Packaging7" Tape & Reel 
Capacitance±10% 
Size0805 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor2.5 %
Ceramic TypeX7R Class II 
Pad Dimension0.5 mm
Rated Voltage50 V (AC)
Length2 mm
Width1.25 mm
Height0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, 68 nF
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance68 nF
Insulation Resistance7.4 GΩ
Packaging7" Tape & Reel 
Capacitance±10% 
Size0805 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor2.5 %
Ceramic TypeX7R Class II 
Pad Dimension0.5 mm
Rated Voltage50 V (AC)
Length2 mm
Width1.25 mm
Height0.8 mm
WR-PHD Pin Header - Single, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Insulation Resistance1000 MΩ
Pitch2.54 mm
PackagingBag 
Operating Temperature -40 °C up to +105 °C
Pins
TypeStraight 
Working Voltage250 V (AC)
Rated Current3 A
Length5.08 mm
MountTHT