| Topology | Other Topology |
| Input voltage | 19-28 V |
| IC revision | 1.3 |
This EVK supports a variety of pin-compatibleROHM stepper motor driver ICs from standard,microstep, low voltage and high voltage familieswith CLK-IN (clock input) or PARA-IN (parallelinput) control. They integrate PWMconstant-current drive with adjustable decay ratioand the ability for full, half and microstepping.The ICs feature single supply operation byintegrating the voltage regulator for the lowpower logic together with highly efficient DMOSoutput power stages. These do not require aninternal charge pump so the motor driversachieve low EMI performance. The motor driversintegrate various protection functions such asGhost Supply Prevention (GSP), ThermalShutdown (TSD), Over-Current Protection(OCP), Under / Over Voltage Lockout (UVLO /OVLO) high ESD resistance and Pin ShortProtection for robust and reliable operation. TheICs are housed in compact HTSSOP-B28 powerpackages. For further details, please also consultthe relevant product datasheets athttp://www.rohm.com.
Designed as plug-in Shield for Arduino platform Recommended: Arduino Uno Several model variants covering wide range ofpin- compatible stepper driver ICs Support of bipolar or unipolar stepper motors Adjustable current limit Adjustable current decay mode Single supply operation Stackable design to allow controlling two motorsat the same time Reverse power supply protection Software library for Arduino IDE Arduino example programs (Sketches) Visithttp://www.rohm.com/web/eu/arduino-stepper-motor-shieldfor details
Order Code | Datasheet | Simulation | Downloads | Status | Product series | Pins | PCB/Cable/Panel | Modularity | Type | Wire Section | C | Tol. C | VR(V (DC)) | Size | Operating Temperature | DF(%) | RISO | Ceramic Type | L(mm) | W(mm) | H(mm) | Fl(mm) | Packaging | Mount | IR(A) | Working Voltage(V (AC)) | Technical Reference | VDC(V) | VBR(V) | IPeak(A) | PDiss(W) | VClamp max.(V) | Samples | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WR-PHD Pin Header - Single, 2, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | Pins2 | – | – | TypeStraight | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length5.08 mm | – | – | – | PackagingBag | MountTHT | Rated Current3 A | Working Voltage250 V (AC) | – | – | – | – | – | – | |||
![]() | WR-TBL Series 102 - 5.00 mm Horizontal Entry Modular, 2, Wire Protector | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-TBL Series 102 - 5.00 mm Horizontal Entry Modular | Pins2 | PCB/Cable/PanelPCB | ModularityYes | TypeHorizontal | Wire Section 22 to 14 (AWG) 0.75 to 1.5 (mm²) | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | – | Length10 mm | – | Height10 mm | – | PackagingBox | MountTHT | Rated Current17.5 A | Working Voltage250 V (AC) | – | – | – | – | – | – | |||
![]() | WR-TBL Series 102 - 5.00 mm Horizontal Entry Modular, 3, Wire Protector | Simulation– | Downloads6 files | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-TBL Series 102 - 5.00 mm Horizontal Entry Modular | Pins3 | PCB/Cable/PanelPCB | ModularityYes | TypeHorizontal | Wire Section 22 to 14 (AWG) 0.75 to 1.5 (mm²) | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | – | – | Length15 mm | – | Height10 mm | – | PackagingBox | MountTHT | Rated Current17.5 A | Working Voltage250 V (AC) | – | – | – | – | – | – | ||
![]() | WR-PHD Pin Header - Single, 3, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWR-PHD Pin Header - Single | Pins3 | – | – | TypeStraight | – | – | – | – | – | Operating Temperature -40 °C up to +105 °C | – | Insulation Resistance1000 MΩ | – | Length7.62 mm | – | – | – | PackagingBag | MountTHT | Rated Current3 A | Working Voltage250 V (AC) | – | – | – | – | – | – | |||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | Capacitance1 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0402 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance10 GΩ | Ceramic TypeX7R Class II | Length1 mm | Width0.5 mm | Height0.5 mm | Pad Dimension0.25 mm | Packaging7" Tape & Reel | – | – | – | Technical ReferenceX7R0402102K050DFCT10000 | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | Capacitance100 nF | Capacitance±10% | Rated Voltage50 V (DC) | Size0805 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor2.5 % | Insulation Resistance5 GΩ | Ceramic TypeX7R Class II | Length2 mm | Width1.25 mm | Height0.8 mm | Pad Dimension0.5 mm | Packaging7" Tape & Reel | – | – | – | Technical ReferenceX7R0805104K050DFCT10000 | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 16 V(DC), –, – | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWCAP-CSGP MLCCs 16 V(DC) | – | – | – | – | – | Capacitance4.7 µF | Capacitance±10% | Rated Voltage16 V (DC) | Size1210 | Operating Temperature -55 °C up to +125 °C | Dissipation Factor5 % | Insulation Resistance0.1 GΩ | Ceramic TypeX7R Class II | Length3.2 mm | Width2.5 mm | Height2 mm | Pad Dimension0.75 mm | Packaging7" Tape & Reel | – | – | – | Technical ReferenceX7R1210475K016DFCT10000 | – | – | – | – | – | |||||
![]() | WE-TVSP Power TVS Diode, –, – | Simulation– | Status Activei| Production is active. Expected lifetime: >10 years. | Product seriesWE-TVSP Power TVS Diode | – | – | – | – | – | – | – | – | SizeDO-214AB | Operating Temperature -65 °C up to +150 °C | – | – | – | Length6.86 mm | Width5.91 mm | Height2.5 mm | – | – | MountSMT | – | – | Technical ReferenceSMCJ26A | DC Operating Voltage26 V | (Reverse) Breakdown Voltage30.4 V | (Reverse) Peak Pulse Current35.7 A | Power Dissipation1500 W | Clamping Voltage [max.]42.1 V |