IC manufacturers Microchip

IC manufacturers (103)

Microchip MCP1012 | Demoboard EV37F82A

MCP1012 15W REFERENCE DESIGN

Overview

TopologyOther Topology
IC revision3

Description

The EV37F82A is intended to act as a reference design for the MCP1012, implementing a complete design with secondary microcontroller. The MCP1012 15W Reference Design demonstrates the ability of the MCP1012 (located on the primary side) to start up a 15W AC-DC Flyback Converter and then have it commanded by a microcontroller (located on the secondary side).The MCP1012 15W Reference Design provides a hardware and software platform to evaluate a novel method of isolated secondary side control. Two key components enable the startup and secondary side regulation of an isolated power supply, the Microchip MCP1012 and the Microchip patented integrated magnetic winding transformer built by Wurth Electronic.

Features

  • MCP1012 uses an open-loop, constant off-time, peak current-mode current regulator
  • MCP1012 uses a high voltage silicon process (0.5µ 5v/30v/700v) to develop a High Voltage (HV) Linear Regulator. The HV Linear Regulator will be rated for 700V, with an input at VIN and a regulated bias output at VDD.
  • VDD is monitored by an Under-voltage Lockout (UVLO) feature
  • VDD is monitored by an Over-voltage Lockout (OVLO) feature
  • The device’s internal open-loop, peak current-mode current regulator operates in constant Off-Time mode. The duration of the Off-Time is internally fixed at 20µs typical
  • MCP1012 provides a MOSFET Gate Driver (GATE)
  • The Gate Driver can be commanded either by the internal open-loop, constant off-time peak current-mode current regulator circuitry or by an external PWM command via PULSE

More information

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Pins
PCB/Cable/Panel
Modularity
Wire Section
C
Safety Class
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Pitch(mm)
Packaging
Tol. C
Size
Operating Temperature
Q(%)
DF(%)
Ceramic Type
Fl(mm)
IRP,40K(A)
ISAT(A)
fres(MHz)
Version
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
Z(mΩ)
Z @ 100 MHz(Ω)
Zmax(Ω)
Test Condition Zmax
IR 2(mA)
RDC max.(mΩ)
Type
IR(A)
L(µH)
VR(V (AC))
VT(V (AC))
Material
L(mm)
W(mm)
H(mm)
Mount
Samples
WE-PD SMT Power Inductor, 2, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
Size7345 
Operating Temperature -40 °C up to +125 °C
Performance Rated Current2.8 A
Saturation Current2.2 A
Self Resonant Frequency19.5 MHz
VersionRobust 
DC Resistance81 mΩ
Rated Current1.6 A
Inductance15 µH
Length7.3 mm
Width7.3 mm
Height4.5 mm
MountSMT 
WR-TBL Series 4155 - 5.08 mm Screwless 45° Entry, 3, Screwless
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityNo 
Wire Section 18 to 22 (AWG) 0.823 to 0.326 (mm²)
Pitch5.08 mm
PackagingBox 
Operating Temperature -30 °C up to +120 °C
Type45° 
Rated Current10 A
Length15.24 mm
MountTHT 
WE-CMB Common Mode Power Line Choke, 4, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
SizeXS 
Operating Temperature -40 °C up to +125 °C
VersionTHT 
DC Resistance140 mΩ
Rated Current1.5 A
Inductance4000 µH
Rated Voltage250 V (AC)
Insulation Test Voltage1500 V (AC)
MaterialMnZn 
Length15.8 mm
Width7.8 mm
Height18 mm
MountTHT 
WE-CBF SMT EMI Suppression Ferrite Bead, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Size0603 
Operating Temperature -55 °C up to +125 °C
Pad Dimension0.3 mm
VersionSMT 
Impedance @ 100 MHz180 Ω
Maximum Impedance250 Ω
Maximum Impedance400 MHz 
Rated Current 21500 mA
DC Resistance90 mΩ
TypeHigh Current 
Rated Current1 A
Length1.6 mm
Width0.8 mm
Height0.8 mm
MountSMT 
WCAP-FTXX Film Capacitors, –, Across the mains
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance100 nF
Safety ClassX2 
Rate of Voltage Rise300 V/µs
Dissipation Factor0.1 %
Insulation Resistance30 GΩ
Pitch15 mm
PackagingCarton 
Capacitance±10% 
SizePitch 15 mm 
Operating Temperature -40 °C up to +105 °C
Rated Voltage310 V (AC)
Length18 mm
Width6 mm
Height12 mm
MountBoxed THT 
WCAP-AT1H Aluminum Electrolytic Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance22 µF
Pitch5 mm
PackagingAmmopack 
Capacitance±20% 
Dissipation Factor20 %
Endurance 10000
Ripple Current557 mA
Leakage Current452 µA
Diameter13 mm
Rated Voltage400 V (AC)
Length20 mm
WCAP-ASLI Aluminum Electrolytic Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance1000 µF
Insulation Resistance0.1 MΩ
Packaging15" Tape & Reel 
Capacitance±20% 
Size10.0 x 10.5 
Operating Temperature -55 °C up to +105 °C
Dissipation Factor19 %
VersionSMT 
Endurance 2000
Ripple Current740 mA
Leakage Current100 µA
Diameter10 mm
Impedance150 mΩ
Rated Voltage10 V (AC)
Length10.5 mm
Width10.3 mm
MountV-Chip SMT 
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance470 pF
Insulation Resistance10 GΩ
Packaging7" Tape & Reel 
Capacitance±5% 
Size0603 
Operating Temperature -55 °C up to +125 °C
Q-Factor1000 %
Ceramic TypeNP0 Class I 
Pad Dimension0.4 mm
Rated Voltage25 V (AC)
Length1.6 mm
Width0.8 mm
Height0.8 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance1 µF
Insulation Resistance0.5 GΩ
Packaging7" Tape & Reel 
Capacitance±10% 
Size0603 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor10 %
Ceramic TypeX7R Class II 
Pad Dimension0.4 mm
Rated Voltage25 V (AC)
Length1.6 mm
Width0.8 mm
Height0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance10 nF
Insulation Resistance10 GΩ
Packaging7" Tape & Reel 
Capacitance±10% 
Size0603 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor2.5 %
Ceramic TypeX7R Class II 
Pad Dimension0.4 mm
Rated Voltage50 V (AC)
Length1.6 mm
Width0.8 mm
Height0.8 mm
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance1 nF
Insulation Resistance10 GΩ
Packaging7" Tape & Reel 
Capacitance±5% 
Size0805 
Operating Temperature -55 °C up to +125 °C
Q-Factor1000 %
Ceramic TypeNP0 Class I 
Pad Dimension0.5 mm
Rated Voltage50 V (AC)
Length2 mm
Width1.25 mm
Height0.8 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance10 µF
Insulation Resistance0.01 GΩ
Packaging7" Tape & Reel 
Capacitance±10% 
Size1206 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor10 %
Ceramic TypeX7R Class II 
Pad Dimension0.5 mm
Rated Voltage25 V (AC)
Length3.2 mm
Width1.6 mm
Height1.6 mm
WCAP-CSGP MLCCs 25 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance22 µF
Insulation Resistance0.005 GΩ
Packaging7" Tape & Reel 
Capacitance±20% 
Size1210 
Operating Temperature -55 °C up to +85 °C
Dissipation Factor10 %
Ceramic TypeX5R Class II 
Pad Dimension0.6 mm
Rated Voltage25 V (AC)
Length3.2 mm
Width2.5 mm
Height2.5 mm
WCAP-CSGP MLCCs 100 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance100 pF
Insulation Resistance10 GΩ
Packaging7" Tape & Reel 
Capacitance±5% 
Size0603 
Operating Temperature -55 °C up to +125 °C
Q-Factor1000 %
Ceramic TypeNP0 Class I 
Pad Dimension0.4 mm
Rated Voltage100 V (AC)
Length1.6 mm
Width0.8 mm
Height0.8 mm
WCAP-CSGP MLCCs 100 V(DC), –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance3.3 nF
Insulation Resistance10 GΩ
Packaging7" Tape & Reel 
Capacitance±10% 
Size0603 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor2.5 %
Ceramic TypeX7R Class II 
Pad Dimension0.4 mm
Rated Voltage100 V (AC)
Length1.6 mm
Width0.8 mm
Height0.8 mm
750318659
Offline Transformer, –, –
Simu­lation
Downloads
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Offline Transformer
Length27.05 mm
Width32.25 mm
Height22.86 mm