IC manufacturers Microchip

IC manufacturers (103)

Microchip HV9123 | Demoboard AUX 5W Flyback

High-Voltage, Current-Mode PWM Controller

Overview

TopologyFlyback Converter
Input voltage10-450 V
Switching frequency1000 kHz
IC revision2

Description

The Supertex HV9123 is a Switch Mode Power Supply (SMPS) controller subsystem that can start and run directly from almost any DC input, from a 12V battery to a rectified and filtered 240VAC line. It contains all the elements required to build a single-switch converter except for the switch, magnetic assembly, output rectifier(s) and filter(s). A unique input circuit allows the HV9123 to self-start directly from a high voltage input, and subsequently take the power to operate from one of the outputs of the converter it is controlling, allowing very efficient operation while maintaining input-to-output galvanic isolation limited in voltage only by the insulation system of the associated magnetic assembly. A ±2% internal bandgap reference, internal operational amplifier, very high speed comparator, and output buffer allow production of rugged, high performance, high efficiency power supplies of 50W or more, which can still be over 80% efficient at outputs of 1.0W or less. The wide dynamic range of the controller system allows designs with extremely wide line and load variations with much less difficulty and much higher efficiency than usual. The exceptionally wide input voltage range also allows better usage of energy stored in input dropout capacitors than with other PWM ICs. Remote on/off controls allow either latching or nonlatching remote shutdown. During shutdown, the power required is under 6.0mW.

Features

  • 10 to 450V input voltage range
  • <1.3mA supply current
  • 1.0MHz clock

  • 20:1 dynamic range @ 500kHz

  • 99% Maximum duty cycle version
  • Low internal noise

Typical applications

  • Off-line high frequency power supplies, Universal input power supplies, High density power supplies, Very high efficiency power supplies, Extra wide load range power supplies

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
fres(MHz)
VOP(V)
Mount
C
VR(V (DC))
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Pitch(mm)
Ø D(mm)
L(mm)
Packaging
Samples
WE-MAPI SMT Power Inductor, 1 µH, 4.95 A
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance1 µH
Performance Rated Current4.95 A
Saturation Current @ 30%5.95 A
DC Resistance39 mΩ
Self Resonant Frequency72 MHz
Operating Voltage80 V
MountSMT 
Length3 mm
WCAP-ATG8 Aluminum Electrolytic Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance100 µF
Rated Voltage16 V (DC)
Endurance 2000
Ripple Current176 mA
Leakage Current16 µA
Dissipation Factor16 %
Pitch2 mm
Diameter5 mm
Length11 mm
PackagingAmmopack 
WCAP-ATG8 Aluminum Electrolytic Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance47 µF
Rated Voltage35 V (DC)
Endurance 2000
Ripple Current143 mA
Leakage Current16.45 µA
Dissipation Factor12 %
Pitch2 mm
Diameter5 mm
Length11 mm
PackagingAmmopack 
WCAP-PTG5 Aluminum Polymer Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
MountRadial THT 
Capacitance220 µF
Rated Voltage16 V (DC)
Endurance 2000
Ripple Current4500 mA
Leakage Current352 µA
Dissipation Factor8 %
Pitch3.5 mm
Diameter8 mm
Length8 mm
PackagingAmmopack