IC manufacturers Infineon Technologies

IC manufacturers (103)

Infineon Technologies XDPL8220

XDPL8220 PFC+Flyback Dual-Stage MultiMode Controller 50W Reference Design with CDM10V Isolated Dimming Interface

Overview

TopologyFlyback Converter
Input voltage90-305 V
Output 148 V / 1.5 A
IC revision1.1

Description

XDPL8220 50 W reference design is a digitally configurable LED driver which has universal input of 90 - 305 Vac, wide output load range of 16-48Vdc and isolated dimming interface (with CDM10V). Please refer next page for the main design features of this board based on XDPL8220 and CDM10V.

Features

  • Dual-stage flyback with power factor correction (PFC) and high-precision primary side-controlled constant voltage (CV), constant current(CC) and limited power (LP) output.
  • Excellent current accuracy of typical +/-2% across universal input voltage range (90 to 305 Vac) and wide output voltage range (from 16V-48V)
  • Integrated 600 V HV cell and PFC aux winding charge pump power supply for fast startup start time under 250ms
  • Multi-mode control (QR+DCM) flyback stage enables high efficiency and low dimming output
  • High power factor (PF>0.9) and low input current total harmonic distortion (iTHD<15%) across universal input voltage range (90 to 305 Vac) and down to 30% load.
  • Short time-to-light down to 250ms.
  • Low Bill Of Materials (BOM)
  • Configurable diming curve to either linear or quadratic (eye-adaptive)
  • Configurable minimum dimming current from 10% to 5%
  • Intelligent thermal management with adaptive temperature protection
  • Active bleeder for dim-to-off function
  • Output independent forward mode auxiliary power supply for controller
  • Isolated dimming interface with CDM10V

Typical applications

  • LED drivers

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Pins
PCB/Cable/Panel
Modularity
Type
Wire Section
ISAT,10%(A)
fres(MHz)
Version
C
VR(V (DC))
Endurance(h)
IRIPPLE(mA)
RESR(mΩ)
ILeak(µA)
DF(%)
Pitch(mm)
Ø D(mm)
L(mm)
Packaging
L(µH)
IR(A)
RDC max.(Ω)
Samples
WR-TBL Series 412MB - 3.50 mm Screwless 45° Entry - 2.08 mm² Wires, 2, Screwless
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityNo 
Type45° 
Wire Section 14 to 20 (AWG) 2.08 to 0.518 (mm²)
Pitch3.5 mm
Length8.5 mm
PackagingBox 
Rated Current2 A
WR-TBL Series 412MB - 3.50 mm Screwless 45° Entry - 2.08 mm² Wires, 3, Screwless
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityNo 
Type45° 
Wire Section 14 to 20 (AWG) 2.08 to 0.518 (mm²)
Pitch3.5 mm
Length12 mm
PackagingBox 
Rated Current2 A
WE-FI Leaded Toroidal Line Choke, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Length14 mm
Inductance68 µH
Rated Current2.8 A
DC Resistance0.055 Ω
WE-TI Radial Leaded Wire Wound Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Saturation Current @ 10%1.3 A
Self Resonant Frequency1.8 MHz
VersionStandard 
Length10.5 mm
Inductance470 µH
Rated Current1.15 A
DC Resistance0.52 Ω
WCAP-PTHR Aluminum Polymer Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance22 µF
Rated Voltage63 V (DC)
Endurance 2000
Ripple Current1400 mA
ESR55 mΩ
Leakage Current277.2 µA
Dissipation Factor12 %
Pitch3.5 mm
Diameter8 mm
Length11.5 mm
PackagingAmmopack