IC manufacturers Infineon Technologies

IC manufacturers (103)

Infineon Technologies ICL5102 | Demoboard ER_201708_PL21_009

130 W dimmable constantcurrent LED driverusing ICL5102 in PFC and LLC topology

Overview

TopologyBuck Converter
IC revision1.1

Description

This Application Note (AN) describes the characteristics and features of a 130 W SMPS LED demonstration board with dimmable constant current output in a voltage range from 76 V down to 38 V. High efficiency, high PF, low THD and a stable output current over the whole output voltage range makes it very suitable for high quality LED lighting such as street lights, high-bay lighting or office lighting. With the highly integrated ICL5102 (combo controller with Critical Conduction Mode (CrCM)/Discontinuous Conduction Mode (DCM) PFC and half bridge LLC integrated), the circuit design is considerably simplified, which results in space and Bill of Materials (BOM) cost savings. Furthermore, numerous monitoring and protection features ensure the highest reliability. Key specification measurements and waveforms are shown in this AN.

Features

  • Input voltage range: 90–305 V AC
  • Input voltage frequency: 47–63 Hz
  • Regulated nominal output current: IOUTnom_min = 1.75 AMIN in an output voltage range from 38 V DC up to 76 V DC
  • IOUTMIN = 74–76 mA (5 percent of IOUTnom_min at VDIM = 1.0 V)
  • Output current ripple at VOUT = 76 V/1.75 A: IOUTRipplemax = 110 mAP_P (± 3 percent)
  • Dimming using an analog 1–10 V interface
  • STB less than 300 mW
  • Time to light: tT2L ~ 350 ms at 90 V AC/VDim = 1.0 V
  • Efficiency at nominal load: ~ 92.0 percent at 230 V AC
  • PF: greater than 90 percent at 50 percent load (230 V ACin)
  • Input current THD: less than 10 percent at 25 percent load (230 V ACin)
  • Low-temperature start-up at -40°C TA
  • OTP at 95 °C/auto-restart at 85°C
  • Output OVP at VOUT = 90 V DC
  • BO/Brown In (BI) detection: at 71 V ACIN/BI at 79 V ACIN
  • Harmonics: according to EN 61000-3-2 Class C
  • EMI: according to EN 55015
  • Safety: according to EN 61347-2-13
  • Board dimensions: 178 mm (L) × 52 mm (B) × 32 mm

Typical applications

  • Dimmable and non-dimmable LED light applications

More information

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
C
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Pitch(mm)
Ø D(mm)
Packaging
IR(A)
L(mH)
RDC max.(mΩ)
VR(V (DC))
VT(V (AC))
Material
L(mm)
W(mm)
H(mm)
Mount
Samples
WCAP-ATG8 Aluminum Electrolytic Capacitors, 33 µF, 2000
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance33 µF
Endurance 2000
Ripple Current105 mA
Leakage Current8.25 µA
Dissipation Factor14 %
Pitch2 mm
Diameter5 mm
PackagingAmmopack 
Rated Voltage25 V (DC)
Length11 mm
WCAP-ATG8 Aluminum Electrolytic Capacitors, 220 µF, 2000
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance220 µF
Endurance 2000
Ripple Current310 mA
Leakage Current55 µA
Dissipation Factor14 %
Pitch2.5 mm
Diameter6.3 mm
PackagingAmmopack 
Rated Voltage25 V (DC)
Length11 mm
WE-CMB Common Mode Power Line Choke, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Rated Current2.5 A
Inductance5 mH
DC Resistance95 mΩ
Rated Voltage250 V (DC)
Insulation Test Voltage1500 V (AC)
MaterialMnZn 
Length23 mm
Width13 mm
Height25.5 mm
MountTHT 
750342805
Power Transformer, –, –
Simu­lation
Downloads
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Power Transformer
750342886
Power Transformer, –, –
Simu­lation
Downloads
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Power Transformer
750315755
Power Inductor, –, –
Simu­lation
Downloads
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Power Inductor
750343180
Flyback Transformer, –, –
Simu­lation
Downloads
Status Activei| Production is active. Expected lifetime: >10 years.
Product series Flyback Transformer