IC manufacturers EPC

IC manufacturers (103)

EPC EPC9176 | Demoboard EPC9176

25 ARMS 3-Phase BLDC Motor Drive Inverter Reference Design Board

Overview

TopologyMotor Drive
Input voltage14-80 V
Switching frequency20-150 kHz
Output 125 A
IC revision3.1

Description

The EPC9176 demonstration board is a 3-phase BLDC motor drive inverter board featuring the EPC23102 ePower™ Stage IC 6.6 mΩ maximum RDS(on), 100 V maximum device voltage. The EPC9176 can deliver up to 35 Apk (25 ARMS) steady state and 40 Apk pulsed output current.The EPC9176 contains all the necessary critical functions circuits to support a complete motor drive inverter including gate drivers, regulated auxiliary power rails for housekeeping supplies, voltage, and temperature sense, accurate current sense, and protection functions.

Features

3-phase inverter based on EPC23102 ePower™ Stage IC with wide input DC voltage ranging from 14 V to 80 VDimensions: L x W = 81 x 75 mm (including connector)Low distortion switching that keeps motor audio emission low and reduces torque rippledv/dt optimized for motor drives less than 10 V/nsCurrent sense, voltage sense, temperature monitoring circuitProtection features including: over-current and input supply under voltage lockoutShaft encoder/Hall sensors interface connector for motor drive application with two voltage levels selection option

Typical applications

Products

Order Code
Data­sheet
Downloads
Status
Product series
Pins
PCB/Cable/Panel
Modularity
Type
Wire Section
L(mm)
Ti
Ø OD(mm)
Ø ID(mm)
Packaging
Qty.
Samples
WR-TBL Series 2164 - 7.62 mm Horizon. Entry w. Rising Cage Clamp, 2, Rising Cage Clamp
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityYes 
TypeHorizontal 
Wire Section 12 to 30 (AWG) 3.31 to 0.05 (mm²)
Length15.24 mm
PackagingBox 
WA-SMSI SMT Steel Spacer with internal Thread M2, –, –
Status Activei| Production is active. Expected lifetime: >10 years.
Length1 mm
Inner ThreadM2 
Outer Diameter4.35 mm
Inner Diameter2.8 mm
PackagingTape and Reel 
Packaging Unit1500