Anpec APW9202 | Demoboard Typical_Application_Circuit

Description

The APW9202/S/L is a two-channel synchronous mode PWM converter with 3A continuous current capability for one channel and 2A continuous current capability for the other one.Each channel of the APW9202/S has independent enable,and it also allows the two regulators to start together by using the same enable signal. Although the switching frequency of the APW9202/S/L is fixed at 800kHz, it can also change the switching frequency via the PWM/SYNC pin.Another feature of this part is its ability to automatically optimize its BW(DyncBandwidth) to allow better dynamic response once it is synchronized to a higher external clock.The APW9202/S/L also provides a 180-degree phase shifting technique to minimize switching noise. The output voltage of each channel can be adjusted using an external resistor divider. Other features include UVP, current limit,and OTP.The APW9202/S/L is available in a VTQFN-13 package with small size and excellent thermal capacity.

Features

• Input Voltage range : 4.5V to 18V.
• 3A/2A Output Current on Channel1/2.
• Low IQ=155μA (typ.) to improve Light Load Efficiency
• Typical 0.6V ±1% Internal Reference Voltage.
• Optimized Upper and Lower MOSFETs RDS_on for max Efficiency:
• N-CH MOSFET (95 mΩ) for CH1 High Side.
• N-CH MOSFET (50 mΩ) for CH1 Low Side.
• N-CH MOSFET (105 mΩ) for CH2 High Side.
• N-CH MOSFET (60 mΩ) for CH2 Low Side.
• Channel Swap Function (APW9202S)
• Level Shifter Output is Referenced to External DC Voltage (APW9202L)
• Built in OVP, UVP, Current Limit and OTP.
• Low Cost VTQFN-13 package.
• Lead Free and Green Devices Available (RoHSCompliant).
• DyncBandwidthTM Technology

Typical applications

• Set-Top-Box, Passive Optical Network, Router, Digital Subscriber Line, G.Fast

More information

• Datasheet