AnDAPT Inc AmP8DB6QF65 | Demoboard ARD_M_MPF_A1

Description

The ARD_M_MPF_A1 is an Ease-of-Use focused power supply designed to provide power to Microchip PolarFire FPGAs for 5 V applications. The design is scalable to support the most basic MPF050 devices with 48k logic elements to MPF500 devices employing 500k logic elements featuring 12.7G transceivers.

Features

• Design supplies all 9 voltage rails (Figure 1) to Microchip PolarFire FPGA device using one AmP PMIC (Figure 1)containing-
• Three sync buck switchers (C200) of 6 A capacity each
• One asynchronous buck switcher (C150) of 6 A capacity
• One LDO (C710) of 2 A capacity
• Inbuilt sequencer (C420) meeting PolarFire turn-on and turn-off timing requirements
• Soft start/shut-down
• Only one input 5 V (±10%) required
• Adjustable output voltage with down to 2.4 mV resolution
• 1% voltage accuracy
• Efficiency up to 90%
• QFN 5x5 sq. mm package
• Protections:Input Under voltage Lockout (ViUVLO), Output Under voltage Lockout (VoUVLO), Overcurrent Protection(OCP), Output Overvoltage Protection (OVP), Over temperature Protection (OTP), Short-circuit Protection (SCP)
• Easy to change any voltage, currents or sequencing (if required) including enable/disable rails using web-basedWebAmp R.D and/or WebAmp software
• Power-good flag output and Enable input
• IC junction temperature range –40°C to +125°C
• Integrated design lending small PCB footprint
• Reference design rails meet or exceed Xilinx power performance requirements

Typical applications

• IoT markets, Wireline access networks, Cellular infrastructure
• Commercial aviation markets
• Industrial automation

More information

• IC product information