IC manufacturers Analog Devices

IC manufacturers (103)

Analog Devices LT3762 | Demoboard DC2342A

LT3762 60V Synchronous Boost LED Controller

Overview

TopologyBoost Converter
Input voltage2.5-42 V
Output 135.5 V / 2 A

Description

Demonstration circuit DC2342A is a 60V synchronous boost LED controller featuring the LT®3762. It drives a single string of LEDs at 2A up to 32V when VIN is between 7V and 28V. It runs down to 4VIN with reduced ILED and can withstand VIN transients as high as 30V. DC2342A runs at approximately 300kHz switching frequency. Spread spectrum frequency modulation (SSFM) can be turned on with a simple jumper, reducing EMI. DC2342A is designed for high power step-up LED controller applica-tions that require excellent efficiency across the VIN range. This demonstration circuit is protected against both open and short LED conditions, each having its own flag

Features

  • 3000:1 External PWM Dimming
  • 250:1 Internal PWM Dimming
  • Wide VIN Operating Range: 2.5V to 38.5V
  • Synchronous Boost Output Voltage up to 60V
  • Spread-Spectrum Frequency Modulation for Lower EMI
  • PMOS Switch Driver for PWM and Output Disconnect
  • Constant Current (±3.5%) Regulation
  • Constant Voltage (±2%) Regulation
  • Rail-to-Rail LED Current Sense: 0V to 60V
  • Programmable VIN Undervoltage Lockout
  • Analog Dimming via Two Control Pins
  • 100kHz to 1MHz Operation
  • Programmable Open LED Protection with OPENLED Flag
  • Short-Circuit Protection and SHORTLED Flag
  • Drives LEDs in Boost, SEPIC, Buck Mode, or BuckBoost Mode Configurations
  • 28 Lead TSSOP and QFN (4mm × 5mm) Exposed Pad Packages

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
L(µH)
IR(A)
ISAT(A)
RDC max.(mΩ)
Material
fres(MHz)
Type
Version
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
Qty.
Pins
Mount
L(mm)
H(mm)
Working Voltage(V (AC))
Operating Temperature
SamplesAvailability & Sample
SPECWE-HCI SMT Flat Wire High Current Inductor, 7.6 µH, –
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance7.6 µH
DC Resistance4 mΩ
MaterialMnZn 
Self Resonant Frequency20 MHz
VersionSMT 
Performance Rated Current22.8 A
Saturation Current @ 10%19 A
Saturation Current @ 30%22 A
DC Resistance3.75 mΩ
Packaging Unit150 
Pins
MountSMT 
Length18.3 mm
Height8.9 mm
Operating Temperature -40 °C up to +125 °C
Check availability
SPECWE-HCI SMT Flat Wire High Current Inductor, 10 µH, –
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance10 µH
DC Resistance7.452 mΩ
MaterialWE-PERM 2 
Self Resonant Frequency14 MHz
VersionSMT 
Performance Rated Current16.5 A
Saturation Current @ 10%10 A
Saturation Current @ 30%21.5 A
DC Resistance6.9 mΩ
Packaging Unit150 
Pins
MountSMT 
Length18.3 mm
Height8.9 mm
Operating Temperature -40 °C up to +150 °C
Check availability
SPECWE-SPC SMT Power Inductor, 47 µH, 0.66 A
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Inductance47 µH
Rated Current0.66 A
Saturation Current1 A
DC Resistance608 mΩ
Self Resonant Frequency10 MHz
VersionSMT 
Packaging Unit500 
Pins
MountSMT 
Length4.8 mm
Height2.8 mm
Operating Temperature -40 °C up to +125 °C
Check availability
SPECWR-PHD Pin Header, –, 2 A
Simu­lation
Availability
Status Activei| Production is active. Expected lifetime: >10 years.
Product seriesWR-PHD Pin Header
Rated Current2 A
TypeStraight 
Packaging Unit1000 
Pins
MountTHT 
Length4 mm
Working Voltage200 V (AC)
Operating Temperature -40 °C up to +105 °C
Check availability