| Topologie | Abwärtswandler |
| Eingangsspannung | 1.8-6 V |
| Schaltfrequenz | 1200-3000 kHz |
| Ausgang 1 | 6 V / 0.6 A |
| IC-Revision | 017 |
The XC9235/XC9236/XC9237 series is a group of synchronous-rectification type DC/DC converters with a built-in 0.42Ω Pchannel MOS driver transistor and 0.52Ω N-channel MOS switching transistor, designed to allow the use of ceramic capacitors.Operating voltage range is from 2.0V to 6.0V (A~C types), 1.8V to 6.0V (D~G types). For the D/F types which have a reference voltage of 0.8 (accuracy:±2.0%), the output voltage can be set from 0.9V by using two external resistors. The A/B/C/E/G types have a fixed output voltage from 0.8V to 4.0V in increments of 0.05V(accuracy:±2.0%). The device provides a high efficiency,stable power supply with an output current of 600mA to be configured using only a coil and two capacitors connected externally. With the built-in oscillator, either 1.2MHz or 3.0MHz can be selected for suiting to your particular application. As for operation mode, the XC9235 series is PWM control, the XC9236 series is automatic PWM/PFM switching control and the XC9237 series can be manually switched between the PWM control mode and the automatic PWM/PFM switching control mode, allowing fast response, low ripple and high efficiency over the full range of loads (from light load to heavy load).The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0μA or less. The B/F/G types have a high speed soft-start as fast as 0.25ms in typical for quick turnon.With the built-in UVLO function, the internal P-channel MOS driver transistor is forced OFF when input voltage becomes 1.4V or lower.The B to G types integrate CL discharge function which enables the electric charge at the output capacitor CL to be discharged via the internal discharge switch located between the LX and VSS pins. When the devices enter stand-by mode, output voltage quickly returns to the VSS level as a result of this function.Four types of package SOT-25, USP-6C, USP-6EL and WLP-5-03 are available.
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | L(µH) | ISAT,10%(A) | ISAT,30%(A) | RDC max.(mΩ) | fres(MHz) | IRP,40K(A) | Montageart | IR(A) | ISAT1(A) | ISAT2(A) | ISAT(mA) | RDC(mΩ) | RDC typ.(mΩ) | VOP(V) | MusterVerfügbarkeit & Muster | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | SPECWE-PMCI Power Molded Chip Induktivität, 0.47 µH, 3.75 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-PMCI Power Molded Chip Induktivität | Induktivität0.47 µH | Sättigungsstrom 13.75 A | Sättigungsstrom @ 30%7.9 A | Gleichstromwiderstand22 mΩ | Eigenresonanzfrequenz140 MHz | Performance Nennstrom6.8 A | MontageartSMT | Nennstrom6.8 A | Sättigungsstrom 13.75 A | Sättigungsstrom 27.9 A | Sättigungsstrom6000 mA | – | Gleichstromwiderstand18 mΩ | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-LQS SMT-Speicherdrossel, 4.7 µH, – Anstehende PCNAufgrund einer anstehenden PCN wird in Kürze eine Änderung am Bauteil durchgeführt. Anbei finden Sie die entsprechende PCN. Bei weiteren Fragen wenden Sie sich bitte an Ihren Vertriebsmitarbeiter. | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-LQS SMT-Speicherdrossel | Induktivität4.7 µH | – | – | – | Eigenresonanzfrequenz48 MHz | – | MontageartSMT | Nennstrom1.7 A | – | – | Sättigungsstrom2200 mA | Gleichstromwiderstand70 mΩ | – | Betriebsspannung120 V | –Verfügbarkeit prüfen | |||
![]() | SPECWE-MAPI SMT-Speicherdrossel, 4.7 µH, 1.4 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAPI SMT-Speicherdrossel | Induktivität4.7 µH | Sättigungsstrom 11.4 A | Sättigungsstrom @ 30%2.65 A | Gleichstromwiderstand345 mΩ | Eigenresonanzfrequenz35 MHz | Performance Nennstrom1.45 A | MontageartSMT | Nennstrom1 A | – | – | Sättigungsstrom2100 mA | – | Gleichstromwiderstand300 mΩ | Betriebsspannung80 V | –Verfügbarkeit prüfen | |||
![]() | SPECWE-MAPI SMT-Speicherdrossel, 4.7 µH, 2.6 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAPI SMT-Speicherdrossel | Induktivität4.7 µH | Sättigungsstrom 12.6 A | Sättigungsstrom @ 30%4.75 A | Gleichstromwiderstand307.8 mΩ | Eigenresonanzfrequenz30 MHz | Performance Nennstrom1.7 A | MontageartSMT | Nennstrom1.1 A | – | – | Sättigungsstrom3800 mA | – | Gleichstromwiderstand267.7 mΩ | Betriebsspannung80 V | –Verfügbarkeit prüfen | |||
![]() | SPECWE-MAPI SMT-Speicherdrossel, 4.7 µH, 1.85 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAPI SMT-Speicherdrossel | Induktivität4.7 µH | Sättigungsstrom 11.85 A | Sättigungsstrom @ 30%3.7 A | Gleichstromwiderstand162 mΩ | Eigenresonanzfrequenz30 MHz | Performance Nennstrom2.4 A | MontageartSMT | Nennstrom1.5 A | – | – | Sättigungsstrom2800 mA | – | Gleichstromwiderstand141 mΩ | Betriebsspannung80 V | –Verfügbarkeit prüfen | |||
![]() | SPECWE-MAIA SMT Speicherdrossel, 4.7 µH, 2.6 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAIA SMT Speicherdrossel | Induktivität4.7 µH | Sättigungsstrom 12.6 A | Sättigungsstrom @ 30%4.75 A | Gleichstromwiderstand307.8 mΩ | Eigenresonanzfrequenz30 MHz | Performance Nennstrom1.7 A | MontageartSMT | – | – | – | – | – | Gleichstromwiderstand267.7 mΩ | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-MAIA SMT Speicherdrossel, 4.7 µH, 1.85 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAIA SMT Speicherdrossel | Induktivität4.7 µH | Sättigungsstrom 11.85 A | Sättigungsstrom @ 30%3.7 A | Gleichstromwiderstand162 mΩ | Eigenresonanzfrequenz30 MHz | Performance Nennstrom2.4 A | MontageartSMT | – | – | – | – | – | Gleichstromwiderstand141 mΩ | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-MAIA SMT Speicherdrossel, 4.7 µH, 1.4 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-MAIA SMT Speicherdrossel | Induktivität4.7 µH | Sättigungsstrom 11.4 A | Sättigungsstrom @ 30%2.65 A | Gleichstromwiderstand345 mΩ | Eigenresonanzfrequenz35 MHz | Performance Nennstrom1.45 A | MontageartSMT | – | – | – | – | – | Gleichstromwiderstand300 mΩ | – | –Verfügbarkeit prüfen | |||
![]() | SPECWE-LQSH SMT Semi-Shielded High Saturation Power Inductor, 4.7 µH, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Induktivität4.7 µH | – | – | Gleichstromwiderstand235 mΩ | Eigenresonanzfrequenz30 MHz | – | MontageartSMT | Nennstrom1.2 A | – | – | Sättigungsstrom2500 mA | – | Gleichstromwiderstand196 mΩ | – | –Verfügbarkeit prüfen |
| Erwartete Verfügbarkeit | Eingehender Bestand | Menge |
|---|---|---|
| Aktuelle Verfügbarkeit | – | – |