IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments UCC28910D

UCC28910, UCC28911 High-Voltage Flyback Switcher with Primary-Side Regulation and Output Current Control

Details

TopologieSperrwandler
Eingangsspannung85-265 V
Schaltfrequenz105-125 kHz
Ausgang 115 V / 0.33 A
IC-RevisionC

Beschreibung

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700-V power FET and a controller that process operating information from the flyback auxiliary winding and power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enable the very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peak primary current modulation, allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses. Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter cost.

Eigenschaften

  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection

Remarks:From main data sheetL1=L2=1mH both are considered as a input signals, due to single transformer T1 at the output signal

Typische Anwendungen

  • Smart plug, IoT, MCU and WiFi Power
  • Home and Building Automation
  • Wall Adapters, Chargers for Mobile Phones
  • LED Lighting
  • Aux power for TV, Server, White Goods
  • Power Metering Bias
  • Bias Power for Smoke Alarm, Fire Alarm and Thermostat

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IR(A)
ISAT,10%(A)
RDC max.(Ω)
fres(MHz)
Version
Vin
VOut1(V)
IOut1(A)
Vaux(V)
fswitch(kHz)
NPRI : NSEC : NAUX
ISAT(A)
VT(V (AC))
Bauform
Montageart
L(mm)
B(mm)
H(mm)
Muster
WE-TI Tonneninduktivität, 100 µH, 0.8 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität100 µH
Nennstrom0.8 A
Sättigungsstrom 10.8 A
Gleichstromwiderstand0.65 Ω
Eigenresonanzfrequenz7.1 MHz
VersionSchrumpfschlauch 
Sättigungsstrom0.8 A
Bauform5075 
MontageartTHT 
Länge6 mm
Breite6 mm
Höhe8.5 mm
WE-OLTI Offline Flyback Transformers, 700 µH, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität700 µH
Input Voltage 70 - 265 V (AC)
Ausgangsspannung 115 V
Ausgangsstrom 10.34 A
Hilfsspannung15 V
Switching Frequency 130
Übersetzungsverhältnis6.6:1:1 
Sättigungsstrom0.575 A
Prüfspannung4000 V (AC)
BauformEE16/7/5 
MontageartTHT 
Länge17.5 mm
Breite18.8 mm
Höhe17.5 mm