Texas Instruments UCC28781-Q1 | Demoboard UCC28781EVM-053

Beschreibung

The UCC28781 is a zero-voltage-switching (ZVS) controller which can be used at very high switching frequencies to minimize the size of the transformer and enable high power density. With direct synchronous rectifier (SR) control, the controller does not need a separate SR controller, as it can drive the SR FET directly to maximize efficiency and simplify design. (For isolated applications, an isolated gate-driver IC is required.)Using adaptive dead-time control for ZVS, switching losses and EMI are minimized. This design results in a controller with extremely high conversion efficiency across the entire operating range.The programmable adaptive burst mode (ABM) gives flexibility to control when the controller enters and exits standby mode to optimize standby power in light and no-load conditions. ABM also helps to reduce ripple and minimize audible noise.The controller offers multiple protection modes with automatic restart (retry) responses.

Eigenschaften

• Switching frequency: > 500 kHz
• Enables peak efficiency > 93 %
• Enables < 45 mW stand-by power
• Adaptive control for zero-voltage-switching (ZVS) and dead-time optimization
• EMI frequency-dithering without trade-offs on transient response or audible noise
• Programmable adaptive burst mode (ABM) with internal compensation
• X-capacitor discharge capability
• Over-temperature, overvoltage, output shortcircuit, overcurrent, over-power, and pin-fault protections
• Auto-recovery fault-responses
• 4 mm × 4 mm, 24-pin, QFN package

Typische Anwendungen

• Industrial AC-DC
• Merchant Network and Server PSU
• Appliances Battery Charger, Merchant Battery Charger
• Soundbar, Smart Speaker

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers