IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments TPS92515HV | Demoboard TIDA-01081

LED-Lighting Control Reference Design for Machine Vision

Details

TopologieAbwärtswandler
Eingangsspannung38-49 V
Schaltfrequenz50-2000 kHz
Ausgang 124 V / 2.4 A
IC-RevisionE2

Beschreibung

The TPS92515 family of devices are compact monolithic switching regulators integrating a low resistance N-Channel MOSFET. The devices are intended for high-brightness LED lighting applications where efficiency, high bandwidth, PWM and/or analog dimming and small size are important.The regulator operates using a constant off-time, peak current control. The operation is simple: after an off-time based on the output voltage, an on-time begins. The on-time ends once the inductor peak current threshold is reached. The TPS92515 device can be configured to maintain a constant peak-to-peak ripple during the ON and OFF periods of a shunt FET dimming cycle. This is ideal for maintaining a linear response across the entire shunt FET dimming range.Steady-state accuracy is aided by the inclusion of a low-offset, high-side comparator. LED current can be modulated using either Analog or PWM dimming, or both simultaneously. Other features include UVLO, wide input voltage operation, inherent LED Open operation and wide operating temperature range with thermal shut-down.The TPS92515 and TPS92515-Q1 devices have an operational input range up to 42 V. The TPS92515HV and TPS92515HV-Q1 offer high-voltage options with an input range up to 65 V. All are available in a thermally enhanced 10-pin HVSSOP package.

Eigenschaften

AEC-Q100 Grade 1 QualifiedIntegrated 290-mΩ (typ) Internal N-Channel FETInput Voltage Range:TPS92515x: 5.5 V to 42 VTPS92515HVx: 5.5 V to 65 VOperation Down to 5.15 V After Start-UpLow Offset High-side Peak Current ComparatorConstant Average Current, up to 2 AInherent Cycle-by-Cycle Current LimitMultiple Dimming Methods10,000:1 Shunt PWM Dimming Range1000:1 PWM Dimming Range200:1 Analog Dimming RangeSimple Constant Off-time ControlNo Loop CompensationFast Transient ResponseThermally Enhanced HVSSOP PackageIntegrated Thermal Protection

Typische Anwendungen

  • Industrial Power Supplies
  • General Purpose Wide Vin Regulation
  • Automotive Battery Regulation
  • Telecom and Datacom Systems

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
fres(MHz)
Montageart
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(mΩ)
Typ
Muster
WE-LHMI SMT Speicherdrossel, 100 µH, 3.2 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität100 µH
Performance Nennstrom3.2 A
Sättigungsstrom 13.45 A
Sättigungsstrom @ 30%6.8 A
Eigenresonanzfrequenz2.4 MHz
MontageartSMT 
Gleichstromwiderstand165 mΩ
WE-CBF SMT-Ferrit, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
MontageartSMT 
Impedanz @ 100 MHz10 Ω
Maximale Impedanz20 Ω
Maximale Impedanz1000 MHz 
Nennstrom 23000 mA
Gleichstromwiderstand25 mΩ
TypHochstrom 
WE-CBF SMT-Ferrit, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
MontageartSMT 
Impedanz @ 100 MHz60 Ω
Maximale Impedanz120 Ω
Maximale Impedanz1000 MHz 
Nennstrom 26000 mA
Gleichstromwiderstand10 mΩ
TypHochstrom