Texas Instruments TPS62826 | Demoboard TPS62826EVM

Beschreibung

The TPS6282x is an ease-to-use synchronous stepdown DC-DC converters family with a very low quiescent current of only 4 μA. Based on the DCS-Control™ topology, it provides a fast transient response. The internal reference allows to regulate the output voltage down to 0.6 V with a high feedback voltage accuracy of 1% over the junction temperature range of –40°C to 125°C. The whole pin-to-pin and BOM-to-BOM compatible device family can be used with a small 470-nH inductor to deliver a scalable 2-A to 3-A power supply solution. The TPS6282x includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery runtime. The device features a Power Good signal and an internal soft start circuit. It is able to operate in 100% mode. For fault protection, it incorporates a HICCUP short circuit protection as well as a thermal shutdown. The device is available in a 6-pin 1.5 x 1.5-mm QFN package, offering the highest power density solution.

Eigenschaften

• DCS-Control™ Topology
• 1% Feedback or Output Voltage Accuracy (full temperature range)
• Up to 97% Efficiency
• 26mΩ and 25mΩ Internal Power MOSFETs
• 2.4-V to 5.5-V Input Voltage Range
• 4-μA Operating Quiescent Current
• 2.2-MHz Switching Frequency
• Adjustable Output Voltage from 0.6 V to 4V
• Power Save Mode for Light Load Efficiency
• 100% Duty Cycle for Lowest Dropout
• Active Output Discharge
• Power Good Output
• Thermal Shutdown Protection
• Hiccup Short-Circuit Protection
• Create a Custom Design Using the TPS6282x With the WEBENCH® Power Designer

Typische Anwendungen

• Industrial PCs and Multi-Function Printers
• Portable Electronics, Generic Point of Loads, Solid State Drives, Surveillance Cameras and Video Doorbells

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers