IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments TPS62162 | Demoboard TIDA-01629

48V/500W Three-phase Inverter with Smart Gate Driver Reference Design for Servo Drives

Details

TopologieAbwärtswandler
Eingangsspannung15 V
Ausgang 13.3 V
IC-RevisionE1

Beschreibung

The TPS6216x device family are easy to use synchronous step-down DC/DC converters optimized for applications with high power density. A high switching frequency of typically 2.25 MHz allows the use of small inductors and provides fast transient response as well as high output voltage accuracy by utilization of the DCS-Control™ topology.With its wide operating input voltage range of 3 V to 17 V, the devices are ideally suited for systems powered from either a Li-Ion or other battery as well as from 12-V intermediate power rails. It supports up to 1-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode).Power sequencing is also possible by configuring the enable and open-drain power good pins.In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode, entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the device is turned off and shutdown current consumption is less than 2 µA.The device, available in adjustable and fixed output voltage versions, is packaged in an 8-pin WSON package measuring 2.00 mm × 2.00 mm (DSG) or 8-pin VSSOP package measuring 3.00 mm x 3.00 mm (DGK).

Eigenschaften

  • DCS-Control™ Topology
  • Input Voltage Range from 3 V to 17 V
  • Up to 1-A Output Current
  • Adjustable Output Voltage From 0.9 V to 6 V
  • Fixed Output Voltage Versions
  • Seamless Power Save Mode Transition
  • Typically 17-μA Quiescent Current
  • Power Good Output
  • 100% Duty Cycle Mode
  • Short Circuit Protection
  • Over Temperature Protection
  • Pin to Pin Compatible With TPS62170 andTPS62125
  • Available in 3.00 mm x 3.00 mm 8-Pin VSSOPand 2.00 mm × 2.00 mm 8-Pin WSON Packages

Typische Anwendungen

  • Video,Mobile PCs, Tablet-PCs, Modems
  • Digital Still Camera,
  • Standard 12-V Rail SuppliesLDO Replacement,
  • Embedded Systems
  • POL Supply From Single or Multiple Li-Ion Battery

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
Z @ 100 MHz(Ω)
Zmax(Ω)
Testbedingung Zmax
IR 2(mA)
RDC max.(Ω)
Typ
Muster
WCAP-CSGP MLCCs 10 V(DC), 10 µF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Kapazität±10% 
Nennspannung10 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
Isolationswiderstand0.01 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
WE-CBF SMT-Ferrit, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
Bauform0402 
Betriebstemperatur -55 °C up to +125 °C
Länge1 mm
Breite0.5 mm
Höhe0.5 mm
Pad Dimension0.25 mm
Impedanz @ 100 MHz100 Ω
Maximale Impedanz200 Ω
Maximale Impedanz800 MHz 
Nennstrom 2870 mA
Gleichstromwiderstand0.3 Ω
TypHochgeschwindigkeit 
WE-CBF SMT-Ferrit, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWE-CBF SMT-Ferrit
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.3 mm
Impedanz @ 100 MHz100 Ω
Maximale Impedanz125 Ω
Maximale Impedanz450 MHz 
Nennstrom 21650 mA
Gleichstromwiderstand0.15 Ω
TypBreitband