IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments TPS61175

TPS61175 3-A High-Voltage Boost Converter With Soft-Start and Programmable Switching Frequency

Details

TopologieSperrwandler
Eingangsspannung3-13.2 V
Schaltfrequenz200-2200 kHz
Ausgang 1-12 V / 0 A
Ausgang 214 V / 0 A
IC-RevisionC

Beschreibung

The TPS61175 is a monolithic switching regulator with integrated 3-A, 40-V power switch. It can be configured in several standard switching-regulatortopologies, including boost, SEPIC and flyback. The device has a wide input voltage range to support application with input voltage from multi-cell batteries or regulated 5-V, 12-V power rails.

The TPS61175 regulates the output voltage with current mode PWM (pulse width modulation) control. The switching frequency of PWM is either set by an external resistor or an external clock signal. The user can program the switching frequency from 200-kHz to 2.2-MHz.

The device features a programmable soft-start function to limit inrush current during start-up, and has built-in other protection features, such as pulse- by-pulse over current limit and thermal shutdown. The TPS61175 is available in 14-pin HTSSOP package with Powerpad.

Eigenschaften

  • 2.9-V to 18-V Input Voltage Range
  • 3A, 40V Internal Switch
  • High Efficiency Power Conversion: Up to 93%
  • Frequency Set by External Resistor: 200-kHz to 2.2-MHz
  • Synchronous External Switching Frequency
  • User Defined Soft Start into Full Load
  • Skip-Switching Cycle for Output Regulation at Light Load
  • 14-pin HTSSOP Package with PowerPad™

Typische Anwendungen

  • 5V to 12V, 24V power conversion
  • Supports SEPIC, Flyback topology
  • ADSL Modems, TV Tuner

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Downloads
Status
Produktserie
LBASE(µH)
IR BASE(A)
ISAT BASE(A)
n
VT(V (AC))
∫Udt Base(µVs)
RDC BASE(mΩ)
Bauform
Typ
Muster
WE-FLEX Flexibler Übertrager für getaktete Stromversorgungen, 21.6 µH, 0.95 A
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität Base21.6 µH
Nennstrom Base0.95 A
Sättigungsstrom Base je Wicklung0.36 A
Übersetzungsverhältnis1:1:1:1:1:1 
Prüfspannung500 V (AC)
Spannung-µSekunde Basis48.3 µVs
Gleichstromwiderstand Base159 mΩ
BauformER14.5/6 
Typmit Luftspalt