Texas Instruments INA310 | Demoboard INA310EVM

Beschreibung

The INA310EVM evaluation module (EVM) is intended to provide basic functional evaluation of the INA310 device. The EVM consists of one printed-circuit board (PCB) with optional PCB cutouts for each of the five gain options (1 to 5). Each PCB cutout has one INA310xn device (where x is version A or B, and n is 1, 2, 3, 4, or 5), test points and sockets for external hardware connections, and pads to solder down optional circuitry. The EVM supports current measurements up to 5 amps through the PCB.

Eigenschaften

• Evaluation of all gain options through provided device boards
• Ease of access to device pins with test points
• Pads and sockets for optional filtering at the input pins and output pin
• Multiple input signal options, including a method to solder a shunt resistor (2512) and measure current up to 5 A

Typische Anwendungen

• 48 V rack server
• Solenoids and actuators
• 48 V battery management systems (BMS)
• 48 V DC/DC converter, 48 V merchant network & server power supply (PSU)

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers