Texas Instruments DS90UB954-Q1

Beschreibung

The Texas Instruments DS90UB954-Q1EVM evaluation module (EVM) is a functional board design for evaluating the DS90UB954-Q1 FPD-Link III deserializer, which converts serialized camera data to MIPI CSI-2 for processing. The MIPI CSI-2 output has four available lanes, and can be configured for either four-lane output or replicated two-lane output. When paired with a DS90UB953-Q1 serializer, the DS90UB954-Q1 receives data from imagers supporting up to 2MP/60fps and 4MP/30fps cameras as well as satellite RADAR. The DS90UB954-Q1 also supports up to 1MP/60fps and 2MP/30fps imagers when coupled with DS90UB913A/933 serializers. The DS90UB954-Q1EVM is configured for communication with a DS90UB953-Q1 on channel 0 (RX0), and a DS90UB933-Q1 on channel 1 (RX1). The EVM has two Rosenberger FAKRA connectors and configurable power-over-coax (POC) voltage for connecting the camera modules (not included). FPD-Link III interfaces also includes a separate low latency bi-directional control channel that conveys control information from an I2C port. General purpose I/O signals such as those required for camera synchronization and functional safety features also make use of this bi-directional control channel to program registers in the DS90UB954-Q1 as well as the connected serializer and any remote I2C connected devices. There is an onboard MSP430 which functions as a USB2ANY bridge for interfacing with a PC for evaluation. The USB2ANY interfaces with the Analog LaunchPAD GUI tool.

Eigenschaften

• AEC-Q100 Qualified for Automotive Applications
  • Device Temperature Grade 2: –40℃ to +105℃ Ambient Operating Temperature Range
• Dual Deserializer Hub Aggregates One or Two Active Sensors Over FPD-Link III Interface
• Power-Over-Coax (PoC) Compatible Transceiver
• MIPI DPHY Version 1.2 / CSI-2 Version 1.3 Compliant
  • CSI-2 Output Ports
  • Supports 1, 2, 3, 4 Data Lanes
  • CSI-2 Data Rate Scalable for 400 Mbps / 800 Mbps / 1.5 Gbps / 1.6 Gbps each Data Lane
  • Programmable Data Types
  • Four Virtual Channels
  • ECC and CRC Generation
• Ultra-Low Data and Control Path Latency
• Supports Single-Ended Coaxial or Shielded Twisted-Pair (STP) Cable
• Adaptive Receive Equalization
• I2C With Fast-Mode Plus up to 1 Mbps
• Flexible GPIOs for Camera Synchronization and Diagnostics
• Compatible With DS90UB935-Q1, DS90UB953-Q1, DS90UB933-Q1 and DS90UB913A-Q1 Serializers
• Line Fault Detection and Advanced Diagnostics
• ISO 10605 and IEC 61000-4-2 ESD Compliant

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers