IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments DRV8874 | Demoboard DRV8874EVM

40-V, 6-A H-bridge motor driver with integrated current sensing feedback

Details

TopologieSonstige Topologie
Eingangsspannung4.5-37 V
Ausgang 16 A
IC-RevisionC

Beschreibung

The DRV8874 evaluation module (EVM) allows easy evaluation of the DRV8874 device.The DRV8874 device is an integrated H-bridge driver for brushed DC and solenoid applications. The evaluation module allows the device to be configured for PWM, phase/enable, or independent half-bridge control modes. An MSP430FR2100 on the board provides PWM signals to the input pins of the DRV8874EVM. The duty cycles of the PWM signals are set by potentiometers on the board.

Eigenschaften

  • N-channel H-bridge motor driver
  • Drives one bidirectional brushed DC motor
  • Two unidirectional brushed DC motors
  • Other resistive and inductive loads
  • 4.5-V to 37-V operating supply voltage range
  • Pin to pin RDS(on) variants
  • DRV8874: 200-mΩ (High-Side + Low-Side)
  • DRV8876: 700-mΩ (High-Side + Low-Side)
  • High output current capability
  • DRV8874: 6-A Peak
  • DRV8876: 3.5-A Peak
  • Integrated current sensing and regulation
  • Proportional current output (IPROPI)
  • Selectable current regulation (IMODE)
  • Cycle-by-cycle or fixed off time
  • Selectable input control modes (PMODE)
  • PH/EN and PWM H-bridge control modes
  • Independent half-bridge control mode
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Ultra low-power sleep mode
  • <1-µA @ VVM = 24-V, TJ = 25°C
  • Spread spectrum clocking for low electromagnetic interference (EMI)
  • Integrated protection features
  • Undervoltage lockout (UVLO)
  • Charge pump undervoltage (CPUV)
  • Overcurrent protection (OCP)
  • Automatic retry or outputs latched off (IMODE)
  • Thermal shutdown (TSD)
  • Automatic fault recovery
  • Fault indicator pin (nFAULT)

Typische Anwendungen

  • Major and small home appliances, vacuum, humanoid and toy robotics, printers and scanners, smart meters, ATMs, currency counters and EPOS
  • Brushed DC motors, servo motors and actuators

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
λDom typ.(nm)
Emittierte Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
Montageart
IR(A)
Arbeitsspannung(V (AC))
Farbe
Gender
Muster
WR-PHD Kurzschlussbrücken, 1, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Betriebstemperatur -40 °C up to +125 °C
Isolationswiderstand1000 MΩ
Länge2.44 mm
VerpackungBeutel 
Nennstrom3 A
Arbeitsspannung250 V (AC)
FarbeSchwarz 
GenderJumper 
WR-TBL Series 101 - 5.00 mm Horizontal Entry Modular, 2, Kabelschutzprinzip
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 26 to 14 (AWG) 0.5 to 2.5 (mm²)
Betriebstemperatur -40 °C up to +105 °C
Länge10 mm
Höhe12.6 mm
VerpackungKarton 
MontageartTHT 
Nennstrom16 A
Arbeitsspannung250 V (AC)
WR-PHD Stiftleisten - Einreihig, 3, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
TypGerade 
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge7.62 mm
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
WR-PHD Stiftleisten - Einreihig, 6, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
TypGerade 
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge15.24 mm
VerpackungBeutel 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
GenderStiftleiste 
WL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]625 nm
Emittierte FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]250 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
Bauform0603 
Betriebstemperatur -40 °C up to +85 °C
Länge1.6 mm
Breite0.8 mm
Höhe0.7 mm
VerpackungTape and Reel 
MontageartSMT 
WL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]570 nm
Emittierte FarbeHellgrün 
Spitzen-Wellenlänge [typ.]572 nm
Lichtstärke [typ.]40 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
Bauform0603 
Betriebstemperatur -40 °C up to +85 °C
Länge1.6 mm
Breite0.8 mm
Höhe0.7 mm
VerpackungTape and Reel 
MontageartSMT 
WCAP-CSGP MLCCs 10 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Kapazität±10% 
Nennspannung10 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
Isolationswiderstand0.1 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität22 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 50 V(DC), –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor10 %
Isolationswiderstand0.1 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel