IC-Hersteller STMicroelectronics

IC-Hersteller (103)

STMicroelectronics Viper27HN | Demoboard STEVAL-ISA147V3

500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller

Details

TopologieSperrwandler
Schaltfrequenz103-127 kHz
IC-Revision5

Beschreibung

The STEVAL-ISA147V3 is a digital switch mode AC-DC converter consisting of two power stages: an input semi-bridgeless power factor corrector (SBPFC) controlled by an STM32F051K8, and a regulation stage implemented with an LLC half bridge with synchronous rectification (SR), controlled by an STM32F334C8 microcontroller.This 500 W AC-DC converter uses the so-called bridgeless PFC topology, with the advantage of lower conduction losses and higher efficiency by eliminating the need for a diode rectifier stage. This choice also allows a reduced component count compared to a standard PFC.The input stage is typically controlled using an outer voltage loop for bus voltage regulation and an inner control loop to shape the current according to a sinusoidal waveform. The outer loop adjusts the current reference in order to maintain a regulated bus voltage, independent of load or input voltage variations. The output isolation and regulation stage is implemented using a half-bridge LLC topology, operating with constant duty cycle and variable frequency control.

Eigenschaften

Input AC voltage: 90 V to 264 V

  • Input AC frequency: 45 Hz to 65 Hz
  • Nominal power: 500 W
  • Output voltage: 12 V
  • Semi-Bridgeless PFC stage
  • DC-DC stage: resonant LLC with synchronous rectification
  • Peak efficiency: 94%
  • PFC switching frequency: 60 kHz
  • DC-DC switching frequency: 80 kHz to 115 kHz (burst mode above)
  • HF transformer isolation voltage: 4 kV
  • Cooling: natural convection up to 300 W, forced cooling above 300 W
  • PFC control: managed by STM32F051K8
  • LLC control: managed by STM32F334C8
  • Input short-circuit protection
  • Input under/overvoltage protection
  • Input under/overfrequency protection
  • DC Bus under/overvoltage protection
  • Output short-circuit protection
  • Output under/overvoltage protection
  • Overtemperature protection
  • RoHS compliant

Typische Anwendungen

  • SMPS for set-top boxes, DVD players and recorders, white goods
  • Low / medium power AC-DC adapters
  • Auxiliary power supply for consumer and home equipments
  • ATX auxiliary power supply

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
VT(V (AC))
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
fres(MHz)
Material
Vin
VOut1(V)
IOut1(A)
Vaux(V)
fswitch(kHz)
NPRI : NSEC : NAUX
L(mm)
B(mm)
H(mm)
Montageart
Bauform
Muster
WE-HCI SMT-Hochstrominduktivität, 1.5 µH, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität1.5 µH
Performance Nennstrom18 A
Sättigungsstrom 16.5 A
Sättigungsstrom @ 30%17 A
Gleichstromwiderstand5.3 mΩ
Eigenresonanzfrequenz63 MHz
MaterialWE-PERM 
Länge10.5 mm
Breite10.2 mm
Höhe4 mm
MontageartSMT 
Bauform1040 
WE-OLSTM Offline Flyback Transformers, 900 µH, 4500 V (AC)
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität900 µH
Prüfspannung4500 V (AC)
Input Voltage 85 - 272 V (AC)
Ausgangsspannung 15 V
Ausgangsstrom 12.4 A
Hilfsspannung14 V
Switching Frequency 50 - 140
Übersetzungsverhältnis14.75:1:2.75 
Länge20.32 mm
Breite24.38 mm
Höhe16 mm
MontageartTHT 
BauformEE16/8/5