IC-Hersteller STMicroelectronics

IC-Hersteller (103)

STMicroelectronics VIPERGAN65W | Demoboard EVLVIPGAN65WF

Details

TopologieSperrwandler
Eingangsspannung90-265 V
Ausgang 124 V
IC-Revision1.0

Beschreibung

The EVLVIPGAN65WF is a 24 V / 65 W reference design set in isolated QR flyback topology, based on the VIPERGAN65W high-voltage converter. This controller combines a low-voltage PWM controller chip with a 700 V GaN HEMT in the same package and integrates:a complete set of features which help design high-efficiency and low-standby-consumption SMPS with a short bill of materials, for cost-effective and fast design: ZVS quasi-resonant operation with dynamic blanking time; feedforward compensation; valley synchronization adjustment; low quiescent current; advanced light load management.a complete set of protections which considerably increase end-product safety and reliability: output overvoltage protection (OVP), output overload/short-circuit protection (OLP), brown-in/out protection, input overvoltage protection (iOVP).To increase the system efficiency, the secondary side rectification is implemented through a power MOSFET driven by the SRK1001 adaptive synchronous rectification controller.

Eigenschaften

Input voltage range: universal AC from 90 - 265 VAC with 50 Hz - 60 Hz frequencyMaximum output power: 65 WOutput voltage: 24 VDCOutput current: 2.7 APeak efficiency: > 92 %Key products: Power GaN IC: VIPERGAN65W; SR IC: SRK1001

Typische Anwendungen

  • Power supplies and converters

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
VR(V (AC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
L(mm)
B(mm)
H(mm)
Verpackung
Tol. C
Bauform
Qmin.
DF(%)
Keramiktyp
Fl(mm)
Betriebstemperatur
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Ø D(mm)
R
Tol. R
PRated(W)
TCR(ppm/ °C)
TCR(ppm/ °C)
VE(V)
VRMS(V)
VDC(V)
VBR(V)
IPeak(A)
Wmax(J)
PDiss(W)
VDE-Zulassung
L(µH)
Q(%)
IR 1(mA)
RDC max.(Ω)
Muster
WE-VD Disk Varistor, 230 VAC, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge9 mm
Breite3.9 mm
Höhe12.5 mm
Bauform7 mm 
Betriebstemperatur -40 °C up to +105 °C
Durchmesser9 mm
Wechselstrom Betriebsspannung275 V
DC Betriebsspannung350 V
(Rückwärts-) Durchbruchspannung430 V
(Reverse) Peak Pulse Current1200 A
Energieabsorption33 J
Verlustleistung0.25 W
VDE-ZulassungJa 
WCAP-FTXX Folienkondensatoren, Across the mains, 47 nF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 nF
Nennspannung310 V (AC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit300 V/µs
Verlustfaktor0.1 %
Isolationswiderstand30 GΩ
Raster10 mm
Länge13 mm
Breite4.5 mm
Höhe9.5 mm
VerpackungLose 
Kapazität±10% 
BauformRaster 10 mm 
Betriebstemperatur -40 °C up to +105 °C
WE-MI SMT-Multilayer-Induktivitäten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge3.2 mm
Breite1.6 mm
Höhe1.1 mm
Bauform1206 
Betriebstemperatur -55 °C up to +125 °C
Induktivität1 µH
Güte45 %
Nennstrom 1100 mA
Gleichstromwiderstand0.4 Ω
WCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, 33 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität33 µF
Nennspannung50 V (AC)
Raster2 mm
Länge11 mm
VerpackungAmmopack 
Verlustfaktor10 %
Endurance 2000
Rippelstrom132 mA
Leckstrom16.5 µA
Durchmesser5 mm
WCAP-ATG8 Aluminium-Elektrolytkondensatoren, –, 22 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität22 µF
Nennspannung35 V (AC)
Raster2 mm
Länge11 mm
VerpackungAmmopack 
Kapazität±20% 
Verlustfaktor12 %
Endurance 2000
Rippelstrom108 mA
Leckstrom7.7 µA
Durchmesser5 mm
WCAP-CSGP MLCCs 50 V(DC), –, 220 pF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 pF
Nennspannung50 V (AC)
Isolationswiderstand10 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0603 
KeramiktypNP0 Klasse I 
Pad Dimension0.4 mm
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
WCAP-CSGP MLCCs 50 V(DC), –, 47 nF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 nF
Nennspannung50 V (AC)
Isolationswiderstand10 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0603 
Güte [1]600 
Verlustfaktor3 %
KeramiktypX7R Klasse II 
Pad Dimension0.4 mm
Betriebstemperatur -55 °C up to +125 °C
WCAP-CSGP MLCCs 50 V(DC), –, 100 nF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Nennspannung50 V (AC)
Isolationswiderstand5 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform0603 
Güte [1]600 
Verlustfaktor3 %
KeramiktypX7R Klasse II 
Pad Dimension0.4 mm
Betriebstemperatur -55 °C up to +125 °C
WCAP-CSGP MLCCs 25 V(DC), –, 1 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Nennspannung25 V (AC)
Isolationswiderstand0.5 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±20% 
Bauform0603 
Güte [1]600 
Verlustfaktor10 %
KeramiktypX5R Klasse II 
Pad Dimension0.4 mm
Betriebstemperatur -55 °C up to +85 °C
WCAP-CSGP MLCCs 50 V(DC), –, 1 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Nennspannung50 V (AC)
Isolationswiderstand0.5 GΩ
Länge3.2 mm
Breite1.6 mm
Höhe1.6 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1206 
Güte [1]600 
Verlustfaktor3 %
KeramiktypX7R Klasse II 
Pad Dimension0.6 mm
Betriebstemperatur -55 °C up to +125 °C
WCAP-CSGP MLCCs 50 V(DC), –, 4.7 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität4.7 µF
Nennspannung50 V (AC)
Isolationswiderstand0.02 GΩ
Länge3.2 mm
Breite1.6 mm
Höhe1.6 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1206 
Güte [1]600 
Verlustfaktor10 %
KeramiktypX7R Klasse II 
Pad Dimension0.5 mm
Betriebstemperatur -55 °C up to +125 °C
WCAP-CSMH Mid and High Voltage, –, 470 pF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 pF
Nennspannung1000 V (AC)
Isolationswiderstand10 GΩ
Länge3.2 mm
Breite1.6 mm
Höhe1.25 mm
Verpackung7" Tape & Reel 
Kapazität±10% 
Bauform1206 
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.6 mm
Betriebstemperatur -55 °C up to +125 °C
Güte600 %
WCAP-CSMH Mid and High Voltage, –, 220 pF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 pF
Nennspannung250 V (AC)
Isolationswiderstand10 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung7" Tape & Reel 
Kapazität±5% 
Bauform0603 
Güte [1]1000 
KeramiktypNP0 Klasse I 
Pad Dimension0.4 mm
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
WCAP-CSGP MLCCs 100 V(DC), –, 10 nF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 nF
Nennspannung100 V (AC)
Isolationswiderstand10 GΩ
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Verpackung13" Tape & Reel 
Kapazität±10% 
Bauform0603 
Verlustfaktor2.5 %
KeramiktypX7R Klasse II 
Pad Dimension0.4 mm
Betriebstemperatur -55 °C up to +125 °C
WRIS-RSKS Dickschicht Widerstand, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge1.6 mm
Breite0.8 mm
Höhe0.45 mm
Bauform0603 
Betriebstemperatur -55 °C up to +155 °C
Widerstand91 kΩ
Widerstand±1% 
Nennleistung0.1 W
Temperaturkoeffizient von Widerständen (min.)-100 ppm/ °C
Temperaturkoeffizient von Widerständen (max.)100 ppm/ °C
Begrenzungselementspannung75 V