IC-Hersteller STMicroelectronics

IC-Hersteller (103)

STMicroelectronics TSC202x | Demoboard STEVAL-AETKT4V1

Details

TopologieSensors
IC-Revision1.0

Beschreibung

The STEVAL-AETKT4V1 evaluation kit implements bidirectional current sense amplifiers. It consists of a motherboard and three different daughter boards for different gain configurations.The STEVAL-AET041V1B is a mother board, which can accept different daughter boards to use different gain configuration.STEVAL-AET042V1B: daughter board with a TSC2020 mounted with a gain of 20.STEVAL-AET043V1B: daughter board with a TSC2021 mounted with a gain of 50.STEVAL-AET044V1B: daughter board with a TSC2022 mounted with a gain of 100.The TSC202x family is a current sense amplifier specifically designed to accurately measure current by amplifying the voltage across a shunt resistor connected to its input. It features a zero-drift topology, allowing it to achieve a high CMRR of at least 100 dB and a low input-offset voltage of 200 µV at a common mode voltage of 12 V and over temperature.Thanks to the use of thin film resistor, TSC202x offers an extremely precise gain and very high CMRR performance even in the high frequency range. Moreover, there is the possibility to fix the output common mode voltage allowing the TSC202x to be either used as a unidirectional or bidirectional current sensing amplifier.TSC202x embedded a system to optimize the PWM rejection, allowing to reduce the effect of fast input common mode voltage variation on the output signal.

Eigenschaften

Wide common-mode voltage: -4 to 100 VHigh common-mode rejection CMR: 100 dB min.Offset voltage: ±150 µV max.Offset drift: 0.5 µV/°C max.Enhanced PWM rejection2.7 to 5.5 V supply voltageGain from 20 to 100Gain error: 0.3% max.Temperature range -40 to 125°CRoHS compliant

Typische Anwendungen

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
Pins
Typ
Montageart
IR(A)
Arbeitsspannung(V (AC))
Muster
WCAP-CSGP MLCCs 100 V(DC), 1 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 100 V(DC), 100 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand1 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
WR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge7.62 mm
VerpackungBeutel 
Pins
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
WR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge12.7 mm
VerpackungBeutel 
Pins
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)