IC-Hersteller STMicroelectronics

IC-Hersteller (103)

STMicroelectronics STISO621WTR | Demoboard STEVAL-7BIDIRCB

Details

TopologieSonstige Topologie
IC-Revision3.0

Beschreibung

The STEVAL-7BIDIRCB is a solution for a 7 kW bidirectional charger, consisting of two stages:1) bidirectional three-channel interleaved totem pole PFC working at fixed frequency in continuous conduction mode (CCM). The three-channel interleaved PFC architecture guarantees the highest efficiency in a wide load range.2) bidirectional resonant full bridge CLLC with synchronous rectification. The CLLC uses frequency modulation to regulate the output.The two stages are digitally controlled by two STM32G474RET6 microcontrollers that are mounted in a single control card.The power stage is fully composed by ST's SiC power MOSFETs, driven by STGAP SiC dedicated gate drivers with galvanic isolation. Thanks to a modular system architecture in combination with the HU3PAK package, a power density of 4 kW/l is achieved.The PFC operates at a switching frequency of 65 kHz and the CLLC operates at variable frequency from 130 kHz to 350 kHz.Thanks to the excellent switching performance of the SiC GEN3 and its Rds(on) temperature stability, a peak efficiency of 97.1 % is achieved in charger mode.The solution is also suitable to implement a solar integrated ESS, thanks to provision for MPPT stage connection.

Eigenschaften

Open-frame power density: 4 kW/l (66 W/inch3)Cooling: natural air convection

Typische Anwendungen

  • Battery Storage Systems for Home, On Board Charger (OBC)

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
Q(%)
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
fres(MHz)
VOP(V)
Montageart
Pins
Gender
Typ
Ausführung
Arbeitsspannung(V (AC))
Muster
WCAP-CSGP MLCCs 50 V(DC), 47 pF, ±5%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 pF
Kapazität±5% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 50 V(DC), 100 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WE-MAPI SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform3020 
Betriebstemperatur -40 up to +125
Länge3 mm
Breite3 mm
Höhe2 mm
Induktivität4.7 µH
Performance Nennstrom2.4 A
Sättigungsstrom @ 30%5.15 A
Gleichstromwiderstand137 mΩ
Eigenresonanzfrequenz30 MHz
Betriebsspannung80 V
MontageartSMT 
Pins
WR-DSUB PCB, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
ProduktserieWR-DSUB PCB
Betriebstemperatur -55 °C up to +105 °C
Isolationswiderstand5000 MΩ
Länge30.81 mm
VerpackungTray 
Pins
GenderMännlich 
TypAbgewinkelt 
AusführungMit Sechskantschraube 
Arbeitsspannung125 V (AC)