STMicroelectronics ST-ONE | Demoboard STDES-65ACFADP Controlboard

Beschreibung

The ST-ONE is the world’s first digital controller embedding ARM Cortex M0+ core, an offline programmable controller with synchronous rectification, and USB PD PHY in a single package. Such a system is specifically designed to control ZVS non-complementary active clamp flyback converters to create high power density chargers and adapters with USB-PD interface. The device includes an active clamp flyback controller and its HV startup on the primary side, a microcontroller and all the peripherals required to control the conversion and the USB-PD communication on the secondary side. The two sides are connected through an embedded galvanically isolated dual communication channel. By using a novel non-complementary control technique and specifically designed power modes the device allows to reach both high efficiency and low no load power consumption.The device is delivered with a pre-loaded firmware which handles both the power conversion and the communication protocols for USB-PD including optional PPS and electronically marked cable management. A dedicated memory stores a default device configuration during factory process. The user can change or adapt this memory area to fit the final product specifications.

Eigenschaften

• ZVS non-complementary active clamp flyback controller with synchronous rectification and USB-PD 3.1 PPS interface
• ARM® 32-bit Cortex®-M0+ MCU with 64 kB flash memory for digital power control and USB protocol
• FW programmable secondary side MCU controls both synchronous rectifier and ZVS Active Clamp flyback on the primary side to improve system efficiency in every condition -High switching frequency operations in companion with MasterGaN power stage allow to use small size magnetic components, including planar transformers
• Reinforced galvanically isolated dual communication channel compliant with IEC 62368: –4 kV pk transient voltage –9.6 kV pk 1min hipot type testing –6.4 kV pk 1s hipot production testing
• 800 V high voltage startup with integrated input voltage sensing and Brownin/out functions
• Active input filter capacitor discharge circuitry for reduced standby power compliant with IEC 62368-1
• Fully Integrated USB-PD PHY with 24 V tolerant protection, and integrated load switch driver

Typische Anwendungen

• USB-PD chargers and adapters up to 100 W for smartphones, tablets, laptops and other handheld equipment

Weiterführende Informationen

• Produktseite des IC-Herstellers