ROHM BM2P26CK-Z | Demoboard BM2P26CK-EVK-001

Beschreibung

This evaluation board’s output voltage is 5 V for an input voltage 90 Vac to 264 Vac and the maximum output current is 0.5 A. The BM2P26CK-Z is an AC/DC flyback converter in PWM Mode with integrated 800 V MOSFET. The built-in 650 V startup circuit in BM2P26CK-Z contributes to low power consumption. Current is restricted in each cycle and excellent performance is achieved in bandwidth and transient response since current mode control is utilized. The switching frequency is operating at 100 kHz. At light load, the switching frequency is reduced and high efficiency is achieved. A built-in frequency hopping function contributes to low EMI. Built-in the low on resistor (6.0 Ω) and high voltage tolerant MOSFET (800 V) make designs easy. The BMP2P26CK-Z has reached (achieved) IEC62368-1 standard authorization. This evaluation board is compliant with CISPR22 Class. B which is the test of the noise pin voltage and emission by an optimum EMI design.

Eigenschaften

• PWM Current Mode Method
• Frequency Hopping Function
• Burst Operation at Light Load
• Frequency Reduction Function
• Built-in 650V Startup Circuit
• Built-in 800V Super Junction MOSFET
• VCC UVLO (Under Voltage Lockout)
• VCC OVP (Over Voltage Protection)
• Over Current Detection Function per Cycle
• Over Current Detection AC Voltage Compensation Function
• Soft Start Function
• External Latch Function
• X Capacitor Discharge Function

Typische Anwendungen

• Household Appliances
• AC Adapters

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers