IC-Hersteller ROHM

IC-Hersteller (103)

ROHM BM2P129TF | Demoboard BM2P129TF-EVK-002

AC/DC Converter Non-Isolation Buck Converter PWM method Output 2W -12V

Details

TopologieAbwärtswandler
Eingangsspannung90-264 V
Ausgang 110.8 V / 0.17 A
IC-Revision001

Beschreibung

The BM2P129TF-EVK-001 evaluation board outputs 12V voltage from the input of 90Vac to 264Vac. The output current supplies up to 0.167A. BM2P109TF which is PWM method DC/DC converter IC built-in 650V MOSFET is used. The BM2P129TF contributes to low power consumption by built-in a 650 V starting circuit. Built-in current detection resistor realizes compact power supply design. Current mode control imposes current limitation on every cycle, providing superior performance in bandwidth and transient response. The switching frequency is 100 kHz in fixed mode. At light load, frequency is reduced and high efficiency is realized. Built-in frequency hopping function contributes to low EMI. Low on-resistance 9.5 Ω 650 V MOSFET built-in contributes to low power consumption and easy design. The flywheel diode is a fast recovery diode of 1A/650 V RFN1LAM6S, contributing to low power consumption.

Eigenschaften

  • PWM frequency: 100kHz
  • PWM current mode method
  • Frequency hopping function
  • Burst operation at light load
  • Built-in 650V/800V start circuit
  • Built-in 650V/800V switching MOSFET
  • VCC pin under voltage protection
  • VCC pin over voltage protection
  • Over current limiter function per cycle
  • Soft start function

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
VR(V (AC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
L(mm)
B(mm)
H(mm)
Verpackung
L(µH)
IR(A)
ISAT(A)
RDC max.(mΩ)
fres(MHz)
Montageart
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Ø D(mm)
Muster
WCAP-FTXX Folienkondensatoren, Across the mains, 100 nF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Nennspannung310 V (AC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit300 V/µs
Verlustfaktor0.1 %
Isolationswiderstand30 GΩ
Raster15 mm
Länge18 mm
Breite6 mm
Höhe12 mm
VerpackungKarton 
MontageartBoxed THT 
WE-TIS Tonneninduktivität, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge11 mm
Breite11 mm
Höhe11.5 mm
Induktivität220 µH
Nennstrom1 A
Sättigungsstrom1.4 A
Gleichstromwiderstand510 mΩ
Eigenresonanzfrequenz2.6 MHz
MontageartTHT 
WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, 220 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 µF
Nennspannung25 V (AC)
Raster3.5 mm
Länge11.5 mm
VerpackungAmmopack 
Endurance 3000
Rippelstrom750 mA
Leckstrom55 µA
Verlustfaktor10 %
Durchmesser8 mm